User's Manual

SDC-WB40NBT User’s Guide
23
SDC-WB40NBT_UsersGuide
© 2011 – 2012 Summit Data Communications, Inc. All rights reserved.
NCC
User’s Guide Requirements
The modular transmitter must be labeled with its own NCC ID number. If the NCC ID is not visible when the module is
installed inside another device, then the outside of the device into which the module is installed must also display a
label referring to the enclosed module. The exterior label can use wording such as the following:
“Contains Transmitter Module NCC ID: CCAB08LPxxxxTx”
or
“Contains NCC ID: CCAB08LPxxxxTx”
European Union
User’s Guide Requirements
The integrator must include specific information in the user’s guide for the device into which the SDC-WB40NBT is
integrated. In addition to the required FCC and IC statements outlined above, the following R&TTE statements must be
added in their entirety and without modification into a prominent place in the user’s guide for the device into which the
SDC-WB40NBT is integrated:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test
methods have been applied in order to prove presumption of conformity with the essential requirements of the
R&TTE Directive 1999/5/EC:
 EN60950-1:2001 A11:2004
Safety of Information Technology Equipment
 EN 300 328 V1.7.1: (2006-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data
transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation
techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive
 EN 301 489-1 V1.6.1: (2005-09)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 1: Common technical requirements
 EN 301 489-17 V1.2.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC)
standard for radio equipment and services; Part 17: Specific conditions for 2,4 GHz wideband transmission
systems and 5 GHz high performance RLAN equipment
 EN 301 893 V1.5.1 (2008-12)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Broadband Radio Access Networks
(BRAN); Specific conditions for 5 GHz high performance RLAN equipment
 EU 2002/95/EC (RoHS)
Declaration of Compliance – EU Directive 2003/95/EC; Reduction of Hazardous Substances (RoHS)