User's Manual
Table Of Contents
SUMMITSEMICONDUCTORLLC
22867NWBennettStreet,Suite200
Hillsboro,OR97124USA
Phone:503615‐7700•Fax:503615‐4232
http://www.summitsemi.com
2.10 FCCInterimSolutiontoDFSbandinterferencewithWeather
Radar
The grantee must ensure that the applications subject to this interim procedure must include
appropriate attestations that the device is intended for indoor use (through a clear indication in a
manual or labels with the device) and must demonstrate through test reports that the transmission is
disabled in the 5600 - 5650 MHz band.
Per above, the master device is intended for indoor use only.
The master device firmware is written to prevent usage of channel 120, 124, and 128 (5600, 5620,
5640).
CAUTION:THEOPERATIONOFTHISDEVICEINTHE5.15GHzto5.25GHz
FREQUENCYBANDISRESTRICTEDTOINDOORUSEONLY
3 OEMInstallationInstructions
In order to maintain compliance with FCC, Industry Canada, and any other applicable regulations, it
is required of the OEM or module level customer to adhere to the guidelines listed in this manual.
3.1 Mountinghardware
The master device PC board provides four 3.5mm diameter holes intended to house up to 3mm
diameter mounting hardware. The installation does not require metal mounting standoff hardware
for grounding purposes but that is recommended.
4 OEMOperatingEnvironment
Operating Temperature: 0 to 70C pcb ambient
Storage Temperature: -40 to 85C pcb ambient
Humidity: 85%, 85degC pcb ambient