User's Manual

8
Excluding a Device:
1. Press-n-hold the Sync button for three (3) seconds. The Z-Wave light blinks faster, twice every second to indicate that the gateway is in exclusion mode.
2. Follow the pairing/unpairing instructions for the Z-Wave device.
3. When the device has been successfully unpaired, the Z-Wave LED flashes rapidly for less than a second, then returns to the exclusion state.
4. Pressing the Sync button once, returns the gateway to the inclusion state. Press the button a second time to return the gateway to its normal operating mode.
It is significantly faster to exclude
devices using the manual method rather
than through the UI7 Portal.