FROST-FREE DRAWER REFRIGERATORS, FREEZERS and REFRIGERATOR/FREEZERS Models: Refrigerators: ASDR1524 SDDR1558 LDR2437 FF642D LADR1545 ASDR2414 SDDR2448 SPR627OS2D ASDR1554 LADR2433 ADRD241 SDR1529 ASDR2444 FF642DADA LDR1549 SDR2418 LDR24A SCFF532DADA LDF24A SCFF532D SPFF51OS2D SPRF2D24ADA LDRF24A SPRF34D Freezers: ADFD243 Refrigerator/Freezers: ADRF244 User Manual BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS. Write Serial Nos.
TABLE OF CONTENTS Appliance Safety 3 Important Safeguards 3-4 Location of Parts 5-6 Installation Instructions 7-9 Before Using your Appliance 7 Installation of your Appliance 7 Electrical Connection 7-9 Anti-tip Bracket Installation 9 Installing the Stainless Steel Handles 9 Fully Overlay Panel Installation 10 Adjusting the Kick Plate 11 Operating your Appliance 11-16 Control Panel for Refrigerators 11-12 Control Panel for Freezers 12-13 Control Panel for Refrigerator/Freezers 1
APPLIANCE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. The symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words "DANGER" or "WARNING".
• • • • • • • • • • • • • • • • • For every ounce of coolant at least 325 cubic feet of room space is required. The amount of coolant in the appliance is stated on the data plate inside the appliance. It is hazardous for anyone other than an Authorized Service Person to carry out servicing or repairs to this appliance. Take serious care when handling, moving and using the appliance to avoid either damaging the refrigerant tubing or increasing the risk of a leak.
LOCATION OF PARTS Refrigerators: ASDR1524 / LADR1545 / ASDR1554 / SDR1529 / LDR1549 / SDDR1558 / ASDR2414 / LADR2433 / ASDR2444 / SDR2418 / LDR2437 / SDDR2448 / ADRD241 / FF642DADA / LDR24A Freezers: ADFD243 / SCFF532DADA / LDF24A Refrigerator/Freezers: ADRF244 / SPRF2D24ADA / LDRF24A / SPRF34D Upper Drawer Divider Digital Control Panel Upper Drawer Lower Drawer Lower Drawer Divider Handle Adjustable Legs 5
Refrigerators: FF642D / SPR627OS2D Freezers: SCFF532D / SPFF51OS2D NOTES: • Models SPR627OS2D, ADRD241, LDR24A, SPFF51OS2D, ADFD243, SCFF532DADA, LDF24A, ADRF244, LDRF24A,and SPRF2D24ADA are designed for outdoor as well as indoor use. They are equipped with a reinforced exterior and a power cord made to stand up to the elements. • Refrigerator model FF642D and freezer model SCFF532D are for indoor use only.
INSTALLATION INSTRUCTIONS Before Using your Appliance • • • • Remove the exterior and interior packing. Before connecting the appliance to the power source, let it stand upright for approximately 2 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. Clean the interior surface with lukewarm water using a soft cloth. Install the handles on the drawers, if they are not already attached. (See Installing the Stainless Steel Handles.
This appliance requires a standard 115/120 Volt AC ~ 60Hz three-prong grounded electrical outlet. Have the wall outlet and circuit checked by a qualified electrician to make sure the outlet is properly grounded. When a standard 2-prong wall outlet is encountered, it is your responsibility and obligation to have it replaced with a properly grounded 3-prong wall outlet. To prevent accidental injury, the cord should be secured behind the appliance and not left exposed or dangling.
3. Models FF642DADA, LDR24A, ADFD243, SCFF532DADA, LDF24A, ADRF244, SPRF2D24ADA and LDRF24A have the same size as ADRD241. 4. Models FF642D, SCFF532D, SPFF51OS2D and SPRF34D have the same size as SPR627OS2D. Anti-tip Bracket Installation To reduce the risk of tipping the unit by abnormal usage or improper loading, the appliance must be secured by properly installing the anti-tip device packed with the appliance. • Place the anti-tip bracket on the floor as shown in the figure.
Full Overlay Panel Installation These models are designed for field-installed overlay panels. The overlay panels cover the stainless steel to give a built-in appearance. The overlay panel and appropriate hardware are not included with the unit and the end user needs to prepare them himself. Please follow the instructions below for installation: • Remove any items stored inside the drawers.
Adjusting the Kick Plate Only for models ASDR1524 / LADR1545 / ASDR1554 / SDR1529 / LDR1549 / SDDR1558 / ASDR2414 / LADR2433 / ASDR2444 / SDR2418 / LDR2437 and SDDR2448. 1 2 The pre-fitted kick-plate of the appliance includes an adjustable kick-plate section that is initially seated behind the upper section. In order to adjust the kick-plate height, follow the instructions below: 1. Remove the screws (1) from both the top left- and top right-hand sides of the kick-plate. 2.
DOWN Used to decrease (cool) the set temperature by 1°C/1ºF. ºF/ºC Selector Select the temperature display in Fahrenheit or Celsius degrees. For refrigerators FF642D and SPR627OS2D, to change the temperature from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds. Indicator Light The indicator light is the dot located at the bottom right corner of the display. The indicator light will be on when a multi-key function is selected.
SuperFreeze SuperFreeze is used to freeze fresh food quickly. The function overrides the thermostat control and will make the compressor operate continuously. It is not necessary to adjust the thermostat setting when using this function. When the function is selected, the SuperFreeze indicator (the dot at the bottom right of the display) will be ON. The function can be turned off by pressing the key again and the indicator will turn OFF. SuperFreeze will turn off automatically after 8 hours.
Control Panel for Refrigerator/freezers ON/OFF Power To turn the appliance off, touch and hold the key for 5 seconds until the temperature display goes off. To turn the appliance on, touch and hold the key for 1 second until the temperature display lights up. NOTE: Touching the POWER key once can switch off the audible alarm when the alarm is on. UP + Used to increase (warm) the set temperature by 1°C/1ºF. DOWN Used to decrease (cool) the set temperature by 1°C/1ºF.
NOTES: • If the unit is unplugged or power is lost or turned off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart before this time delay, the unit will not start. • When you use the unit for the first time or restart the unit after it has been shut off for a long time, there could be a few degrees variance between the temperature you select and the one indicated on the LED readout. This is normal and is due to the length of the activation time.
Using the Freezer (if available) • • • • This unit is designed for the long-term storage of frozen food. Storage time is up to three months. The storage life of frozen foods varies, and the recommended storage time should not be exceeded. Pre-packed commercially frozen food should be stored in accordance with the frozen foods manufacturer’s instructions for a three-star frozen food storage compartment or home freezer. Place frozen food into the freezer as quickly as possible after purchase.
CARE AND MAINTENANCE Cleaning Your Appliance • • • • • • Turn off the power, unplug the appliance, and remove all items, including racks and dividers. Wash the inside surfaces with a solution of warm water and baking soda (about 2 tablespoons of baking soda to a quart of water). Wash the racks and dividers with a mild detergent solution. Wring excess water out of the sponge or cloth when cleaning the area where the controls are located, or any electrical parts.
TROUBLESHOOTING You can solve many common problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. PROBLEM Appliance does not operate. Appliance is not cold enough. Appliance turns itself on and off frequently. POSSIBLE CAUSE Appliance is not connected to a power supply. The appliance is turned off. Tripped circuit breaker or blown fuse The temperature is not set correctly.
“E5” or “E7”. The alarm sounds and the temperature display flashes. temperature sensor has failed. “E3” or “E4” indicates that the defrost sensor in the evaporator has failed. “E5” indicates defrost heater failure. “E7” indicates door switch failure. Has a drawer been open for longer than 60 seconds? If not, then the temperature has risen higher or fallen lower than the temperature that has been set. This could be due to: The appliance drawers being opened too often.
LIMITED WARRANTY ONE-YEAR LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects.
