Owner's Manual

12
DOWN -
Used to decrease (cool) the set temperature by 1°C/1ºF.
ºF/ºC Selector
Select the temperature display in Fahrenheit or Celsius degrees.
For refrigerators FF642D and SPR627OS2D, to change the temperature from Fahrenheit to Celsius
or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.
Indicator Light
The indicator light is the dot located at the bottom right corner of the display. The indicator light will
be on when a multi-key function is selected. To perform a multi-key function, touch and hold the first
key, then touch the second key for at least 5 seconds and then release both keys.
Child Lock
If in 2 minutes or longer without touching any key, the child lock will be activated automatically. To
cancel the lock, touch the UP and DOWN keys at the same time for at least 5 seconds and the
indicator light will flash three times to confirm the action.
Setting the Temperature Control
• You can set the temperature by pressing the UP and DOWN symbols. When you press either of
the two buttons for the first time, the LED readout will show the original temperature set
previously. (The temperature preset at the factory is 38°F or 3°C.)
• The temperature you are setting will increase by one degree each time you press the UP
symbol, and will decrease by one degree each time you press the DOWN symbol.
• The range of set temperatures is from 36°F to 43°F.
• To view the set temperature at any time, press the UP or DOWN symbol. The set temperature will
temporarily flash in the display window for 5 seconds. Then the display shows the current inner
temperature again.
Control Panel for Freezers
(Only for freezers SCFF532D / SPFF51OS2D)
ON/OFF Power
To turn the appliance off, press and hold the key for 5 seconds until the temperature display goes
off. To turn the appliance on, press and hold the key for 1 second until the temperature display
lights up.
NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.