Owner Manual
8 
ECO mode: 
  Press and hold the button    for 3 seconds to enter or exit ECO mode. 
  In this mode, the interior LED light, the compressor indicator    and the temperature value 
on the display panel will be turned off and the symbol °will illuminate on the upper left corner 
of °C / °F. 
Light / Lock 
  LED lamp brightness mode: with Memory IC (when unit restarts after power failure unit, will 
auto recover to last setting), the default brightness is 100%. Each time the button    is 
pressed, the brightness of the LED will be cycled through the four positions (100%, 75%, 50%, 
OFF)   
  Press and hold for 3 seconds to lock or unlock the control panel. 
ON/OFF Power / 
Mute 
  To turn the appliance on or off, press and hold the ON/OFF button for 3 seconds. 
  When the high/low temperature alarm is activated, the buzzer will sound continuously. Press 
  one time to turn off the alarm. 
  LOCK 
If illuminated, indicates the control panel is locked.   
  RUN 
When unit’s compressor is running, this indicator light will illuminate to signify that cooling mode 
is currently in operation. 
Demo mode 
  Press and hold buttons  ,    and   simultaneously for 10 seconds to enter or 
exit demo mode. 
  In this mode, the display panel can operate settings, but the temperature is a fixed display 
12°C (54°F) and all fans plus the compressor will not start. 
Sabbath mode 
  Press and hold buttons    and  at the same time for at least 5 seconds to enter or exit 
Sabbath mode. In this mode, LED will display "Sb". This mode turns off the displays, interior 
light and prevents them from turning on again. Normal cooling operations will still take place. 
The compressor and the fan work normally. 
When  the  cabinet  power  off,  it  will  not  automatically  exit  Sabbath  mode,  and  it  will  keep 
Sabbath mode when power on again. The Sabbath Mode will automatically turn off after 96 
hours. 
Defrosting 
  The unit defrosts automatically in normal operating conditions. 
  The evaporator behind the rear wall of the unit defrosts automatically. Water will drain through 
the drain pipe from the back of the product. Users need to bring the water to the drain or find 
an appliance to load the water. (If loading with an appliance, you need to  pay attention to 
clearing the water regularly) 
  However, frost may accumulate on the evaporator if the unit is repeatedly opened in a high 
heat or high humidity location. If this frost pattern does not clear within 24 hours, your unit will 
require manual defrosting. 
Mandatory 
defrost mode: 
Press the    and    at one time for 10 seconds to enter the compulsory defrost mode. 










