Owner Manual

NOTE:

If the unit is unplugged or turned off, or if there has been a power failure, you must wait 5 minutes

before restarting the unit. If you attempt to restart before this time delay, the appliance will not start.

When you use the appliance for the first time, or restart it after it has been shut off for a long time,

there could be a few degrees variance between the temperature you select and the one indicated

on the display. This is normal and due to the length of inactivation time. Once the appliance has

been running for a few hours, everything will be back to normal.

Temperature Alarm Function

If the ambient temperature is ≥30°C (86°F) for 2 hours, the high temperature alarm will be activated,

the LED will display "HH", the buzzer will sound continuously, the cooling system continues to work.

The display returns to normal when the high temperature condition is relieved.

If the ambient temperature is <0°C (32°F) for 1 hour, the low temperature alarm will be activated, the

LED will display "LL", the buzzer will sound continuously, the cooling system will stop working. The

display returns to normal when the low temperature is relieved.

NOTE:

It is normal that the cabinet shows “HH” or “LL” from time to time. If it occurs frequently or lasts

for a long time, you can restart the unit by unplugging it, then re-plugging after 5 minutes. If the

problem occurs again after restarting, please contact customer service.

Before reconnecting the power, wait 3 to 5 minutes. Otherwise you could damage your

appliance. If you attempt to start the appliance before the end of this time delay, the appliance

will not turn on.

If you turn on the appliance for the first time or after a restart, or after it has been out of operation

for a long time, there may be a temperature difference between the temperature inside the

appliance and that on the LED display. This is a normal event caused by the duration of the

activation period. Leave the appliance turned on for several hours and the temperature will stabilize

during operation.

CALIFORNIA CARB/SNAP DISCLOSURE

This product uses eco-friendly hydrocarbon refrigerant and fully complies with California

CARB regulations.

However, we are required by California Law to provide the following disclosure statement in every

product sold in California.

"This equipment is prohibited from use in California with any refrigerants on the 'List of Prohibited

Substances' for that specific end-use, in accordance with California Code of Regulations, title 17,

section 95374. This disclosure statement has been reviewed and approved by Felix Storch, Inc. and

Felix Storch, Inc. attests, under penalty of perjury, that these statements are true and accurate."

This product does not use any refrigerants on the 'List of Prohibited Substances'"