Use & Care

ManualsBrandsSummit ManualsBeverage Coolers3 CU.FT. Counter Height Vaccine Refrigerator

AccuCold, Div of Felix Storch, Inc. | R005-07102018

Felix Storch, Inc. │ Bronx, NY 10474│ Tel: (718) 893-3900│ Fax: (844) 478-8799

Features

 Data logger simultaneously displays minimum, maximum and current

temperatures

 The unit will provide a visual and audio alert when temperature rises above or falls

below the high and low set points.

 The min/max feature is designed to monitor and store the highest and lowest

readings until the memory is cleared, or removal of battery.

 The temperature sensor is enclosed in a glycol-filled bottle, protecting it from rapid

temperature changes when refrigerator/freezer door is opened.

 Low battery alert function ( battery symbol flashes)

 User can select

C or

F temperature display

 Measuring temperature range -45 ~ 120

C ( or -49 ~ 248

 Operating conditions: -10 ~ 60

C ( or -50 ~ 140

F) and 20% to 90%

non-condensing (relative humidity)

 Accuracy : ± 0.5

C (-10 ~ 10

C or 14 ~ 50

F), in other range ± 1

C ( or ± 2

 User defined logging interval

 6.5 ft (2 meters) NTC probe-connecting cable

 Rechargeable Li-ion battery to record data up to 8 hours during a power-failure

event

 Powered by a 12VDC power adapter

 Compatible with a USB 3.0 Extension Cable for durability and easy data transfer

 Large LED lit LCD screen

 Dimensions：137mm(L)×76mm(W)×40mm(D)

 Mounting hole dimension: 71.5mm(W) x 133mm(L)

TEMPERATURE DATA LOGGER (DL2B) USER MANUAL

SAVE THIS MANUAL FOR FUTURE REFERENCE

Summary of content (10 pages)

PAGE 1
TEMPERATURE DATA LOGGER (DL2B) USER MANUAL Features      Data logger simultaneously displays minimum, maximum and current temperatures The unit will provide a visual and audio alert when temperature rises above or falls below the high and low set points. The min/max feature is designed to monitor and store the highest and lowest readings until the memory is cleared, or removal of battery.
PAGE 2
READ ALL INSTRUCTIONS BEFORE USE Package Contents  Data logger  Instructions manual  4 GB Memory stick [FAT 32]  Temperature sensor (NTC)  Rechargeable x2 AA  Power adapter in a glycol-filled bottle batteries (1.5Volts)  Antistatic bag  NIST-traceable calibration certificate Installing the Data logger 1. Install the backup battery Unscrew the battery compartment cover located on the back of the unit and install the battery. Follow polarity (+/-) diagram below. Replace the battery cover.
PAGE 3
To Use NOTE: Before use, remove and discard the clear plastic protective film from the screen (LCD).  Place the temperature sensor (in glycol bottle) in the location to be monitored, such as inside a refrigerator or freezer. The data logger may be placed on top of unit with LCD display easily visible and the alarm audible. Data Logger displays internal temperature of unit being monitored, as well as maximum and minimum temperatures reached.
PAGE 4
Buttons Description REC/STOP Press REC/STOP to STOP or RECORD data. MAX/MIN Press for 3 seconds to ERASE the MIN and MAX temperature history. DL Copy the recorded data (CSV file) to USB SET Hold the SET button to cycle through configuration settings. Up/Down keys to change settings. Press and hold either key to advance the values rapidly. Default Data Logger Settings Code Function Range Default Setting o o *Please enter the correct temperature units F / C 4 C2 ~ 100oC /212 oF 8.
PAGE 5
Programming the Data Logger (continued) Low Alarm Temperature Setting From the main display screen: Hold the SET key for 3 seconds. Enter the correct password then press the SET key 2x to enter the LO Temp Alarm setting mode. Use the up and down arrows to adjust the temperature accordingly. Press SET key ONCE to confirm the settings. Alarm Hysteresis Hysteresis is the tolerance band to prevent alarm chattering.
PAGE 6
Programming the Data Logger (continued) Offset temperature Logging/Record Interval The offset temperature feature is useful for customers who require a positive or negative temperature offset to be applied to the temperature sensor reading. By default, the offset temperature is preset to 0 oC. To change the setting, follow instructions below: From the main display screen: Hold the SET key for 3 seconds. Enter the correct password then press the SET key 7x to enter the Offset temperature setting mode.
PAGE 7
Please note:  When the MEM is full, the unit overwrites old data  If the temperature sensor is loose or not inserted, “NP” will be displayed and the NP alarm will be activated.  When PAS is 0 there is no password. User can enter parameter setup directly.  When the logging interval (LI) =0, the record interval is 10 seconds.  To modify the factory settings: Press the SET key for 3 seconds to enter parameter setup state. After adjusting parameters, press SET key button again for 3 seconds.
PAGE 8
Troubleshooting Displays „NP‟  The temperature sensor is not installed correctly. Display screen not working  Make sure the AC adapter and batteries are installed correctly. “Low battery” indicator flashing  Battery may need to be recharged. Logger is not logging  Press the key and make sure the REC symbol appears on the display.  The logger will stop logging if AC power is removed and rechargeable battery is not connected or not charged.
PAGE 9
Battery Handling and Usage: WARNING To reduce the risk of serious personal injury:  Keep batteries away from children. Only adults should handle batteries.  Follow the battery manufacturer’s safety and usage instructions.  Never throw batteries into a fire.  Dispose of or recycle spent/discharged batteries in compliance with all applicable laws. CAUTION To reduce the risk of personal injury:  Always use the size and type of battery indicated.
PAGE 10
AccuCold, Div of Felix Storch, Inc. • 770 Garrison Ave. • Bronx, NY 10474 • Tel: 718-893-3900 • Fax: 844-478-8799 10 AccuCold, Div of Felix Storch, Inc.