User Manual

10
PROBLEMS WITH YOUR ICEMAKER
You can solve many common icemaker problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling the
servicer.
TROUBLESHOOTING GUIDE FOR CABINET
PROBLEM
POSSIBLE CAUSE
Icemaker does not operate.
Not plugged in.
The appliance is turned off.
The circuit breaker has tripped or a
fuse has blown.
Icemaker is not cold enough.
Check the temperature control setting.
External environment may require a
higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal
properly.
Turns on and off frequently.
The room temperature is warmer than
normal.
A large amount of content has been
added to the icemaker.
The door is opened too often.
The door is not closed completely.
The temperature control is not set
correctly.
The door gasket does not seal
properly.
Vibrations
Check to be sure that the icemaker is
level.
Icemaker seems to make too much noise.
Some noise may come from the flow of
the refrigerant, which is normal.
As each cycle ends, you may hear
gurgling sounds caused by the flow
of refrigerant in your icemaker.
Contraction and expansion of the inside
walls may cause popping and
crackling noises.
The icemaker is not level.
The door will not close properly.
The icemaker is not level.
The door was reversed and not
properly reinstalled.
The gasket is dirty.
The shelves are out of position.