Integrated Frame Instructions

ManualsBrandsSummit ManualsCommercialSummit 15 Inch Wide 25 Lbs. Capacity Built-In Ice Maker with 50 Lbs. Daily Ice Production

DETAIL A

DETAIL B

1) Remove Door from Chassis by unscrewing

3 screws in Top Hinge and 2 screws in Bottom

Hinge. Keep screws, discard hinges.

2) Attach customer supplied handle to Door Panel

using countersunk screws.

3) Screw Door panel to Frame using 14 screws.

4) Slide Frame over Refrigerator door and attach

with 1 screw on each side, center of door.

5) Screw Bottom Pc to Door with 2 screws.

6) Attach Top Brace to Frame with 1 screw on side.

Attach Bottom Brace in the same manner.

7) Drill a hole thru the Top and Bottom Frame using

the Braces as a guide with a 5/32" drill bit. Install

screws to finish attaching the Top and Bottom

Braces securely to the Frame.

8) Drill a hole into the Door Panel from the top and

bottom using the Braces as a guide with a 1/4"

drill bit. Do not exceed 5/8". This is the hole that

the door will pivot on.

9) Remount the door using the supplied Top and

Bottom Hinges.

Top Hinge

Bottom Brace

Frame

Bottom

Step 7

Step 4

Step 8

Top Brace

Step 6

Instructions for

Integrated Frame

Summit Appliance

1-718-893-3900

(Built-In Application)

Door Panel

23 5/16" x 28 1/4" FF7

19 1/2" x 31 1/2" FF511

14 5/8" x 30" SCR1536B

SWC1535B

Hinge FF7

or SCR1536B

SWC1535B

Hinge FF511

Summary of content (1 pages)

PAGE 1
Instructions for Integrated Frame (Built-In Application) Top Hinge or DETAIL A Step 7 Step 8 Frame Top Brace Step 6 A 1) Remove Door from Chassis by unscrewing 3 screws in Top Hinge and 2 screws in Bottom Hinge. Keep screws, discard hinges. 2) Attach customer supplied handle to Door Panel using countersunk screws. 3) Screw Door panel to Frame using 14 screws. 4) Slide Frame over Refrigerator door and attach with 1 screw on each side, center of door. Step 4 5) Screw Bottom Pc to Door with 2 screws.