Use and Care

Setting the Temperature Control

• You can set the temperature by touching the UP and DOWN symbols. When you push the two

buttons at the same time, the LED readout will show the original temperature set previously.

(The temperature preset at the factory is 54°F, or 12°C.)

• The temperature you are setting will increase by one degree each time you touch the Up symbol,

and will decrease by one degree each time you touch the DOWN symbol.

• The range of the temperature control is from 41°F to 68°F.

• To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature

will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit

will reappear in the display window.

Control Panel for Model CL244WC

ON/OFF Power

• To turn the appliance off, press and hold the key for 5 seconds until the temperature display

goes out.

• To turn the appliance on, press and hold the key for 1 second until temperature display lights

up.

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on.

Light

Turn the interior light on and off with this switch.

Used to increase (warm) the set temperature by 1°C/1ºF.

Down

Used to decrease (cool) the set temperature by 1°C/1ºF.

Indicator Light

The indicator light is the dot at the bottom right of the display. The indicator light will be on when a

multi-key function is selected. To perform a multi-key function, press and hold the first key, then

press the second key for at least 5 seconds and then release both keys.

ºF/ºC Selector

Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature

from Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5

seconds.