Use & Care

Setting the Temperature Control

• The unit has two separate temperature zones. The temperature of both zones can be set

between 41ºF and 68ºF (5ºC and 20ºC). It can be used as a wine maturing cabinet or a wine

serving cabinet. For maturing wine, the recommended temperature setting ranges of both zones

should be between 52ºF and 57ºF (11ºC and 14ºC). For serving wine, the recommended

temperature setting range of the UPPER zone should be between 41ºF and 50ºF (5ºC and 10ºC)

which is ideal for serving champagne and white wine, and the recommended temperature setting

range of the LOWER zone should be between 58ºF and 68ºF (15ºC and 20ºC) which is ideal for

serving red wine.

• When the unit is plugged in for the first time, it will power up automatically to the preset defaults.

The preset temperature at the factory for the UPPER temperature zone is 46ºF (8ºC) and for the

LOWER temperature zone is 54ºF (12ºC).

• You can press the left side UP and DOWN keys to control the internal temperature of the

UPPER temperature zone and press the right side UP and DOWN keys to control the internal

temperature of the LOWER temperature zone. When you press the two keys at the same time,

the display will show the last temperature set previously.

NOTE: The temperature set for the LOWER temperature zone must always be just as high as or

higher than that in the UPPER temperature zone. For optimal performance, the set

temperature of the two zones should differ by at least 8F°.

• The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once; on

the contrary the temperature will decrease 1ºC or 1ºF if you press the DOWN key once. The

display flashes while you input the setting.

• After the temperature has been set, the display shows the current inner temperature of the

particular temperature zone.

• To view the set temperature at any time, press the UP or DOWN key; the set temperature will

temporarily ﬂash in the display for 5 seconds. Then the display shows the current inner

temperature again.

Interior Light

• The interior light makes it easy to view your wine labels and enhances the display of your

collection. The LIGHT switch allows you to toggle between 2 modes of operation for the internal

lights: functional (default) mode and showcase mode. If you are in functional (default) mode (also

named Energy Saving Mode), the lights will turn on only when the door is open. If you are in

showcase mode, the lights will be on whether or not the door is open.

• The unit is fitted with an LED light system and it is designed for extremely long life. It is not user

serviceable. To change the LED light fitting, please contact the service department.

NOTE: Please use only the same type of LED light fittings originally provided by the manufacturer.