Manual

3
• To ensure proper ventilation for your refrigerator, the front of the unit must be
completely unobstructed. Choose a well-ventilated area with temperatures above
60°F (16°C) and below 90°F (32°C). This unit must be installed in an area protected
from the elements such as wind, rain, water spray or drips.
• The refrigerator should not be located next to ovens, grills or other sources of high
heat.
• The refrigerator must be installed with an electrical connection in accordance with
state and local codes. A standard electrical supply (115-120V AC only, 60 Hz),
properly grounded in accordance with the National Electrical Code and local codes
and ordinances is required.
• If there is a sudden power outage, allow at least 5 minutes before re-powering the unit,
in order to protect the compressor.
• Do not kink or pinch the power supply cord of the refrigerator.
• The fuse (or circuit breaker) size should be 15 amps.
• It is important for the refrigerator to be leveled in order to work properly. You may
need to make several adjustments to level it.
• Do not overfill, to allow for free circulation of air.
• To avoid damaging your fingers, do not touch frozen food with wet hands.
• If the appliance will not be used for a long time, it should be turned off.
• Do not use mechanical devices or other means to accelerate the defrosting process.
• Do not damage the refrigerant coils.
• Do not use electric appliances inside the food storage compartments of appliance,
unless they are of the type recommended by the manufacturer.
• Do not use solvent-based cleaning agents or abrasives on the interior. These
cleaners may damage or discolor the interior.
• This appliance is not intended for use by young children or infirm persons without
supervision.
• This appliance is intended for household use, and should not be used for any other
purpose.
CAUTION: THIS APPLIANCE IS NOT DESIGNED FOR THE STORAGE OF MEDICINE
OR OTHER MEDICAL PRODUCTS.
SAVE THESE INSTRUCTIONS