2-Burner Electric Cooktops Models: CR2B23T3B CR2B15T1B CR2B23T4W CR2B15T2W USER’S MANUAL Please read this manual carefully before use and keep it in a safe place for future reference. Some figures in this manual are for reference only and may not exactly match the product you purchased. FELIX STORCH, INC. An ISO 9001:2008 registered company 770 Garrison Avenue Bronx, New York 10474 www.summitappliance.
TABLE OF CONTENTS Important Safeguards ..................................................................................... 3 – 5 Electrical safety ............................................................................................. 3 Safety during use .................................................................................... 3 – 4 Safety when cleaning .................................................................................... 4 How to avoid damaging the appliance ..............
IMPORTANT SAFEGUARDS WARNING: INSTALLATIONS MUST COMPLY WITH ALL LOCAL, STATE AND NATIONAL ELECTRICAL CODES. This appliance must be properly installed and grounded by a qualified technician. Failure to comply with the applicable codes may result in fire, property damage, personal injury or death. If the electric power supply does not meet the product specifications, consult with a licensed electrician before proceeding with installation. Save this documentation for review by local inspector.
7. Never place combustible items on the cooktop. 8. You must not keep any combustible items such as aerosol cans in a drawer located under the cooktop. Likewise, do not keep items made of plastic with a low melting point in a drawer below the cooktop. 9. To eliminate the risk of burns from reaching over heated surface units, cabinet storage space located above surface units should be avoided.
Pots and pans The better the pot, the better the cooking results. 1. You can recognize good pots and pans by their bases. The base should be as thick and flat as possible. 2. When buying new pots and pans, pay particular attention to the diameter of the base. Manufacturers often only state the diameter of the rim. 3. Pots with aluminum or copper bases can cause metallic discoloration on the ceramic glass surface which is very difficult or impossible to remove. 4.
INSTALLATION Important! This new appliance may only be installed and connected by a registered specialist. Please observe these instructions; otherwise the warranty will not cover any damage that may occur. Appliance dimensions Width 290mm (11.42”) Depth 520mm (20.5”) Height 50mm (2.0”) Countertop cut-out dimensions Width 273mm (10.75”) Depth 505mm (19.9”) Height 150mm (5.
ELECTRICAL CONNECTIONS IMPORTANT SAFETY INSTRUCTIONS Be sure your cooktop is installed and grounded properly by a qualified installer or service technician. This cooktop must be electrically grounded in accordance with local codes or, in their absence, with the National Electrical Code ANSI/NFPA No. 70, latest edition in the United States.
WARNING! Electrical grounding is required on this appliance. This appliance is manufactured with a supply wire and a frame-connected grounding wire. NOTE TO ELECTRICIAN: The armored cable leads supplied with the appliance are UL-listed for connection to larger gauge household wiring. The insulation of the leads is rated at temperatures much higher than the temperature rating of household wiring.
COOKING ZONES AND CONTROLS Models CR2B23T3B & CR2B23T4W Single cooking zone 6.9” (175mm) 1800W/230V Single cooking zone 5.
Models CR2B15T1B & CR2B15T2W Single cooking zone 5.5” (140mm) 1200W/120V Single cooking zone 5.5” (140mm) 1200W/120V Residual heat indicators Hot TIMER Cooking zone 1200W (140mm) 1200W/120V Hot Cooking zone 1200W (140mm) 1200W/120V –/+ Child Lock ON/OFF Cooking zones: The appliance is fitted with ceramic glass. Touch Control: Your appliance is operated using Touch Control.
Control and function indicators: Digital indicators provide information about settings made, functions activated, as well as any residual heat of the corresponding cooking zone. Safety cut-off: A safety cut-off ensures that all cooking zones switch off if the ON/OFF key is pressed, but no power levels are selected within 1 minute. ON/OFF: Switches power on and off with one touch. Residual heat indicator: Shows burner is still hot even though turned off.
Heat Level Setting To select the appropriate cooking zone and set the heat level, touch the corresponding cooking zone key. Touch the cooking zone key once, and the default digital display shows [ 5 ]. Keep touching the key of the desired cooking zone, and the heating level will loop through the settings from [0] to [9]. Tips: When you touch back to zero, the burners do not turn off, but remain in a stand-by mode.
CARE AND CLEANING Cleaning the cooktop Only use an approved ceramic cooktop cleaner on the glass cooktop. Other creams may not be as effective or they might damage the surface with scratches or permanent staining. To maintain and protect the surface of your glass cooktop, follow these steps: ① Before using the cooktop for the first time, clean it with a ceramic cooktop cleaner. This helps protect the top and makes cleanup easier.
Metal marks and scratches ① Be careful not to slide pots and pans across your cooktop. This will leave metal marks on the cooktop surface. These marks are removable using an approved ceramic cooktop cleaner. ② If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave a black discoloration on the cooktop. This should be removed immediately before heating again or the discoloration may become permanent.
TROUBLESHOOTING Problem Description Burner not glowing red after selecting cooking zone (approximately 3 seconds) Reason * Plug not inserted into an active socket * Break in inner circuit Burner glowing red intermittently * The cooktop temperature is controlled by switching the heat on and off. This means that it is not always possible to see the burner glowing red. If you select a low heat setting, the heat will switch off more often than at higher heat settings.
LIMITED WARRANTY Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects.
