Use & Care

TROUBLESHOOTING

Problem Description

Reason

Burner not glowing red after

selecting cooking zone

(approximately 3 seconds)

* Plug not inserted into an active socket

* Break in inner circuit

Burner glowing red intermittently

* The cooktop temperature is controlled by switching the

heat on and off. This means that it is not always

possible to see the burner glowing red. If you select a

low heat setting, the heat will switch off more often than

at higher heat settings. The heat also switches on and

off at the highest setting.

Heating plate broken

* Stop using the cooktop if there is a crack, chip or

missing piece.

Heating time longer than

expected

* Concavity of pot base is too great.

* Size of pot base is too big.

This symbol on the product or in the instructions means that your electrical and electronic

equipment should be disposed of at the end of its useful life separately from your household

waste. For more information please contact your local authorities or the retailer where you

purchased the product.