Installation & Owners Manual

TOUCH CONTROL FEATURES

LOCATIONS OF SURFACE ELEMENTS AND CONTROLS

Refer to the diagram below to locate the control button for each of the surface burner

elements on the cooktop.

POWER ON/OFF: Touch the POWER ON/OFF button to turn the entire cooktop ON and

OFF. When it is ON, the cooktop is in standby mode until a Cooking Zone is activated.

CHILD LOCK: With this key the controls can be locked as a safety precaution for children.

Press once and all buttons are locked except the ON/OFF button. When you touch this

key once more for 3 sec., Child Lock will be released. Or you can press ON/OFF to cancel

this setting.

To set the element power level: Select the desired Cooking Zone

and then press

for the active Cooking Zone to adjust the power level from 0 to 9.

RESIDUAL HEAT INDICATORS: Your cooktop has a residual heat indicator, marked Hot,

over each Cooking Zone key. The indicator warns that this area has been used and is still

giving off enough heat to cause burns. Avoid touching the Cooking Zone when this

indicator is lit. Although the cooktop is OFF, the light will stay lit until the cooktop has cooled

down.

Single left

rear element

Dual right

rear element

Single left

front element

Single right

front element

Child Lock

On/Off

Timer

Hot Hot Hot Hot

Residual heat

indicators