Instructions

R3-081016 6
Content of exported report
The report varies based on the set alarm types.
When unit is set to ―no alarm‖, there is no alarm info on the top right corner of the first
page or color mark among data.
When it is set to ―alarm‖, relative alarm info appears in the alarm info column based on the
selected alarms. Over high temperature data is in red. Below low temperature data is in
blue. Normal data is in black. If alarm cases occur, they will be marked as alarm status on
top right corner of the first page; otherwise, it is in normal status.
Finish viewing
Exit the data logger after viewing the report.
Product diagram……………………………………………………………………
Replacing the battery……………………………………………………………….
PLEASE NOTE
Before replacing the battery you must first shut down the data
logger. If not, when restarting the logger, the time will be incorrect.
Step 1. Rotate the transparent cap and remove it in the direction shown in Fig. 20.
Fig.20
1
USB
4
Transparent cap
2
LCD screen
5
Battery compartment
3
Button