Use & Care

15
will not close
properly.
• The gaskets are dirty.
• The racks or bins are out of position.
adjustable feet.
• Clean the drawer gaskets.
• Check the racks and bins and refit
correctly.
Display “E0”,
“E1”. “E2”,
“E3”, “E4”,
“E5” or “E7”.
• “E0” indicates a communication error
for 3 zone models.
• “E1” or “E2” indicates that the air
temperature sensor has failed.
• “E3” or “E4”indicates that the defrost
sensor in the evaporator has failed.
• “E5” indicates defrost heater failure.
• “E7” indicates door switch failure.
• Call for service.
The alarm
sounds and
the
temperature
display
flashes.
Has a drawer been open for longer than
60 seconds? If not, then the
temperature has risen higher or fallen
lower than the temperature that has
been set. This could be due to:
• The appliance drawers being opened
too often.
• The ventilation opening being
covered or too dusty.
• A lengthy interruption in the power
supply.
• A large amount of food has been
added to the unit.
If yes, close the drawer.
• Do not open drawers more often
than necessary.
• Clear the obstructions and clean off
the dust.
• Leave the appliance to work for a
while until the set temperature has
been reached.
The icon “--”
is lit and
flashing in the
temperature
display.
• The display temperature is out of
range.
• Only temperatures within the range
0~99°F/-9~37°C for SPR626OS2D
and the range -49~99°F/-45~37°C
for SCFF51OS2D can be
displayed. If the temperature is not
within this range, the icon “--” will be
displayed instead. This is normal.
If you've checked the table above and find that you still need help with your appliance, call our
Customer Service facility at 800-932-4267 between 9:00AM and 5:00PM ET. We will do our best to
answer your questions.