Use and Care

21
Range Light
1. To replace light bulbs, first disconnect
power to the oven at the circuit breaker
panel or by unplugging.
2. To release cover, remove the screw on
the light cover. (See illustration.)
3. DO NOT USE BULBS LARGER THAN
30 WATTS.
4. Close light cover and secure with screw
removed in step 2.
CAUTION: Light cover may become very
hot. Do not touch glass when light is on.
Charcoal Filter
Charcoal filter is used for nonvented,
recirculated installation. The filter should
be changed every 6 to 12 months
depending on use.
1. Disconnect power to the oven at the
circuit breaker panel or by unplugging.
2. Remove the louver mounting screw from
the top center of the louver and push
down carefully on the tab at each end of
the louver to disengage it. (See
illustration.)
3. Pull the louver away from the unit.
4. Change the charcoal filter.
5. Carefully push the louver back into place
and replace the screw removed in step 2.
Oven Light
Remove the louver per instructions 1~3
above and charcoal filter, if used.
1. Open light cover located behind filter
mounting by carefully pulling up on the
front edge.
2. DO NOT USE A BULB LARGER THAN
30 WATTS.
3. Replace the oven light cover by carefully
pushing into place. Replace the charcoal
filter, if used. Push the louver back into
place and replace the louver mounting
screw.