Bumper Installation

Summit Appliance Division · Felix Storch, Inc. · www.summitappliance.com · 718-893-3900 · [e-mail]
Stainless Steel Corner Protectors
Included: (2) bumpers with double-sided tape
This bumper set is designed to help protect the front corners of
your freezer from bumps and dents. They are not required to
operate your unit.
After unpacking your freezer, simply line each bumper up against
the front corner, remove the seal on the double-sided tape, and
push the bumper into place.
If you have any questions about your Summit freezer or the
bumper installation, contact our team at 718-893-3900 or visit us
online at summitappliance.com