Installation Sheet

• The temperature should be adjusted according to ambient temperature and the food

items being stored. As you can see from the illustration on page 5, the temperature

control can be adjusted on a scale of 1 through 5, with 5 being the coldest setting.

(The control is set at 3 at the factory.)

• The control should be set at an appropriate position before the appliance is used,

since frequent adjustment during use is not advisable. Normally in summer when the

ambient temperature is high, the control should be set at 2. In winter, when the

ambient temperature is low, a setting of 4 is appropriate.

• When the temperature control is set a 0, the appliance stops running.

CAUTION

• If power is disconnected, do not try to restart the freezer within 5 minutes of the

power disconnect.

• Do not make holes through the walls of the unit in order to mount other items.

• Avoid splashing water on the unit.

• Do not store medical or pharmaceutical products in the unit.

• Keep the keys of the door lock out of the reach of children.

Storing Items in the Unit

• Avoid putting a large number of items into the unit at one time. Leave some space

around the items to allow an unimpeded flow of cold air.

• To lower energy consumption and prolong the life of the compressor, avoid putting

warm food into the unit. Only foods that are cold or at room temperature or already

frozen should be put into the freezer.

• Never store any flammable, explosive or corrosive materials in or near the freezer.

• Beer and other beverages, fresh flowers, medicine and injectables should not be

placed in the freezer.

Defrosting the Unit

If there is a heavy frost buildup in the SCFU386, remove the contents and disconnect

the power. Any frost that has accumulated will melt. Wipe up the melt water with a clean

sponge or soft cloth, then dry the unit thoroughly. Finally, reconnect the power.

Interior Light

The rocker switch on the back of the cabinet controls the interior light. Pressing the

switch turns the light on and off.

Anti-Sweat Switch

This switch, located next to the light switch on the back of the cabinet, can be turned on

when the ambient temperature is extremely low. It prevents moisture from depositing on

the interior of the glass door.