Owner's Manual

Page 6

APPLIANCE USE

In order to ensure proper temperature, you need to permit proper air-

flow in the appliance. Do not block any air vents. If the vents are

blocked, airflow will be prevented, and temperature and moisture prob-

lems may occur. Always position contents to allow some airflow be-

tween shelves or baskets.

Allow the appliance to cool at least 6 to 8 hours before adding contents.

Allow 24 hours for temperature to stabilize.

NOTE: When the appliance is first started, the compressor will run con-

stantly until the appliance is cooled. It may take 6 to 8 hours (or

longer), depending on room temperature and the number of times

the appliance door is opened. After the appliance is cooled, the com-

pressor will turn on and off as needed to keep the appliance at the

proper temperature.

The outside of your appliance may feel warm. This is normal. The appli-

ance’s design and main function is to remove heat from packages and

air space inside the appliance. The heat is transferred to the room air,

making the outside of the appliance feel warm. (In some models the

condenser that gets warm is inside the side walls, making these walls

warm to the touch.).

ENERGY SAVING TIPS

 The more airflow you can provide around an appliance, the less en-

ergy it will use.

 Your appliance needs defrosting if ice build-up reaches a thickness of

1/2 inch.

 Keep the door open a minimum of time, and shut securely.

Felix Storch, Inc. www.summitmedicalrefrigerators.com

Page 15

installing the appliance. Many customers will be satisfied with

a warmer set-point, which is still colder than many household

freezers.

Self-Closing Door

A standard feature of all ACCUCOLD™ models is the self-closing

door. The door closes automatically when opened at angles less than

90°. This feature increases a unit’s efficiency by preventing too much

ambient warmth from entering to influence interior temperatures.

This is especially true in high traffic facilities where users may not

always take the time to ensure that the door is closed after use.

ADA-Compliant Models

Models with ADA in their suffix are 32” tall and are designed

to fit under counters built to a height specified by the

Americans with Disabilities Act.

APPLIANCE DESCRIPTIONS (cont’d)