Installation instructions

Installation Instructions

Drilling the Pilot Holes and

Mounting the Oven

C Securing the Oven in the Opening

b. Secure the oven to cabinet with screws provided.

NOTE: If the cabinet is particle board, you must use

#8 x 19 mm (3/4”) particle board screws. These may

be purchased at any hardware store.

a. Drill through the mounting holes in front frame,

for the #8 screws provided.

The screws must be a

minimum of 6 mm (1/

4") from the front of

the cutout.

NOTE: Before drilling the pilot holes, make sure

the oven is pushed as far back into the opening as

it will go and is centered.

WARNING: Mounting screws

must be used. Failure to do so could

result in the oven falling out of the cabi-

net, causing serious injury.