USE & CARE GUIDE PLUS Series REFRIGERATORS AND FREEZERS FOR GENERAL PURPOSE STORAGE MED/MEDDT Series REFRIGERATORS AND FREEZERS FOR MEDICAL STORAGE If you need service or call with a question, please have this information ready. We advise you to keep this Use & Care Guide in your possession. Model: ___________ Serial number: _________________ Options added: Date of purchase: Dealer: For parts: visit our website FELIX STORCH, INC. NOTE: This manual is also www.summitappliance.
Model Numbers PLUS Models: FF6 / FF7 / FF28LWH / FF31L7 / FF511L / FF521BL / FFAR2L / FFAR21L / FFAR24L / FFAR25L7 / FF590SSHH PLUS Series All-refrigerators with automatic defrost or frost-free operation VT65ML PLUS Series Low temperature freezers FFAR10 PLUS Series Full-size storage all-refrigerators FS20L / FS21L / FS22L / FS24L PLUS Series Compact all-freezers (-20°C) CM411L / CM421BL / CP35LL / CT66 / S19LWH PLUS Series Compact refrigerator-freezers FCL44 / FS30L / FS60ML / FS407L / FS4
Table of Contents Model Numbers ......................................................................... 1 Appliance Safety ....................................................................... 3 Proper disposal of an old appliance ..................................... 3 Installation Instructions ........................................................... 4 Key Eject lock ....................................................................... 4 Location Requirements ......................................
Appliance Safety Your safety and the safety of others are very important to us. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. You can be seriously injured or even killed if you don’t follow instructions. Safety messages will tell you what the potential hazard is, how to reduce the chance of injury, and what can happen if the instructions are not followed.
Installation Instructions Excessive Weight Hazard ! Use two or more people to move and install your appliance. Failure to do so can result in back or other injury. ALLOW APPLIANCE TO SIT UPRIGHT FOR 24 HOURS BEFORE TURNING ON, TO ALLOW THE COMPRESSOR LUBRICANT TO DRAIN. 1. Remove packaging materials. 2. Remove tape and glue residue from surfaces before turning on the appliance. Rub a small amount of liquid dish soap over the adhesive with your fingers. Rinse with warm water and dry. 3.
Location Requirements Keep flammable materials and vapors, such as gasoline, away from appliances. Failure to do so can result in fire, explosion or death. Location: IMPORTANT: Do not install the appliance near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 40°F (5°C). Do not place in direct sunlight. Check the strength of the floor before installing your appliance. It should hold the weight of a fully loaded appliance.
Leveling your appliance (some upright models): Locate the two front leveling legs that may be taped among the packing materials. (In many models these legs are already mounted into the underside of the appliance.) 1. Screw these legs into the front holes on the bottom of the appliance. The back of the appliance rests on two fixed supports. (Built-in models also have rear level legs that can provide more precise leveling). 2. Adjust the front legs just enough to lift the cabinet up off the floor.
Appliance Care Cleaning a frost-free appliance: Use nonflammable cleaners. Frost-free means that you do not have to defrost your appliance. Frost is removed by air moving and collecting any moisture and depositing it on the cooling coil. The cooling coil periodically warms up enough to melt the frost, and the water then flows down to the drain pan (located behind the base grill) where it is evaporated. Complete cleaning should be done at least once a year. 1. Unplug appliance or disconnect power. 2.
Base grill (some models only): To Remove and Replace the Base Grill: 1. Open the appliance door and remove the base grill by pulling down and out from the top. 2. Replace the base grill by putting the clips in the openings in the appliance panel. Push in until the base grill snaps into place. Changing the light bulb (some models only): NOTE: Not all appliance bulbs will fit your appliance. Be sure to replace the bulb with one of the same size, shape, base size and wattage. You can purchase bulbs from www.
Temperature Selection and Monitoring YOUR APPLIANCE MAY HAVE A MECHANICAL (DIAL) OR DIGITAL THERMOSTAT. DIAL INSTRUCTIONS ARE BELOW. DIGITAL INSTRUCTIONS ARE ON PAGE 10. Manual (dial) thermostat (on most models): Your refrigerator may be controlled with a thermostat knob located inside the unit, towards the right-hand corner. Turn the knob clockwise from the STOP (0) position toward the higher numbers for colder temperatures.
Digital thermostat (on certain models): If you find it necessary to change the temperature setting for your digital-thermostat controlled appliance, please refer to the following instructions. The front panel of the melting thermostat is illustrated here: snowflake snowflake UP & DOWN arrows SET key To see the SET POINT: Push and immediately release the SET key. The display will show the SET POINT value. Wait 5 seconds and the probe value will display again.
Setting the Temperature Control: You can set the temperature by touching the UP and DOWN symbols. When you push either of the two buttons for the first time, the LED readout will show the original temperature set previously. (The temperature preset at the factory is 38°F, or 3°C.) The temperature you are setting will increase by one degree each time you touch the UP symbol, and will decrease by one degree each time you touch the DOWN symbol.
Thermometer (PLUS models): This digital thermometer simultaneously displays maximum, minimum and current temperatures. The Max/Min feature monitors and stores the highest and lowest readings since the battery was inserted or since the RESET button was last pressed. The temperature sensor, or probe, is enclosed in a glycol-filled bottle that you insert into the location to be monitored, such as inside a refrigerator or freezer.
Thermometer/alarm instructions (cont’d): Function of Controls: MODE/RESET Key: Press ONCE to reset Max/Min temperature record. When the unit is sounding an alarm, press ONCE to turn off the beeping sound. HIGH/LOW Key: Press ONCE to display high alarm setting. Press TWICE to display low alarm setting. Press THREE TIMES to display current temperature reading. ALERT ON/OFF Key: When the unit is sounding an alarm, press ONCE to turn off.
Keypad Lock (optional on most models) Factory-set default password: The factory-set default password is 0123. If the default password is lost, press the key (located inside the battery box) for 30 seconds, then wait for the warning sound which signifies the factory-set default password has been restored. To set the password: While door is open, press the key (located inside the battery box) until it jingles, enter the 0123 password, then # within 10 seconds to confirm.
Operation of Specific Models SCFF51OSWH MED and ACF48WMEDDT Series These frost-free all-freezers can be built-in or free-standing. They do not require defrosting and have a digital thermostat, LED lighting and a lock. At the top of the unit is a cooling system that uses a fan to provide cold air. For best operation, do not block the air flow with contents.
Troubleshooting Try these solutions first to avoid the cost of an unnecessary service call. Your appliance will not operate: Has a household fuse blown or circuit breaker tripped? Replace the fuse or reset the circuit breaker. Is the freezer defrosting (on some models)? Recheck to see whether the freezer is operating in 30 minutes. Your freezer will regularly run an automatic defrost cycle. There is water in the defrost drain pan (on some models): Is the freezer defrosting? The water will evaporate.
Limited Warranty ONE YEAR LIMITED WARRANTY FOR APPLIANCE Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects.
par MODE D’EMPLOI Série PLUS Réfrigérateurs et congélateurs pour l'entreposage générale Série MED/MEDDT Réfrigérateurs et congélateurs pour le stockage médical Si vous avez besoin de service ou appelez avec une question, avoir cette information prête. Nous vous conseillons de conserver ce manuel en votre possession.
Numéros de modèle Modèles PLUS : Série FF6 / FF7 / FF28LWH / FF31L7 / FF511L / FF521BL / FFAR2L / FFAR21L / FFAR24L / FFAR25L7 / FF590SSHH PLUS Tout-réfrigérateurs à dégivrage automatique ou fonctionnement sans givre Série VT65ML PLUS Congélateurs à basse température Série FFAR10 PLUS Tout-réfrigérateurs grand format de stockage Série FS20L / FS21L / FS22L / FS24L PLUS Tout-congélateurs compacts (-20 °C) Série CM411L / CM421BL / CP35LL / CT66 / S19LWH PLUS Réfrigérateur-congélateurs compacts
Table des matières Numéros de modèle ............................................................... 19 Sécurité des appareils ............................................................ 21 La mise au rebut d'un ancien appareil ............................... 21 Instructions d'installation ...................................................... 22 Serrure à clé éjectable ........................................................ 22 Exigences d'emplacement .............................................
Sécurité des appareils Votre sécurité et celle des autres est très importante pour nous. Nous donnons de nombreux messages de sécurité importants dans ce manuel et sur votre appareil. Toujours lire et respecter les consignes de sécurité. Vous pouvez être gravement blessé ou même tué si vous ne suivez pas les instructions. Les messages de sécurité vous diront quel est le danger potentiel, comment réduire le risque de blessure et ce qui peut arriver si les instructions ne sont pas suivies.
Instructions d’installation Danger de poids excessif ! Utilisez deux ou plusieurs personnes pour déplacer et installer votre appareil. Ne pas le faire peut conduire aux blessures à dos ou d'autres. LAISSER L'APPAREIL EN POSITION VERTICALE PENDANT 24 AVANT LE DÉMARRAGE AFIN DE PERMETTRE AU LUBRIFIANT POUR LES COMPRESSEURS À DRAINER. 1. Retirer les matériaux d'emballage. 2. Retirer le ruban et la colle des surfaces avant d'allumer l'appareil. Frotter une 3. 4. 5. 6. 7.
Exigences d’emplacement Garder les matériaux et les vapeurs inflammables, tels que l'essence, loin des appareils. Ne pas le faire peut entraîner un incendie, une explosion ou la mort. Emplacement : IMPORTANT: Ne pas installer l'appareil près d'un four, d'un radiateur ou autre source de chaleur, ni dans un endroit où la température sera inférieure à 40 ° F (5 ° C). Ne placez pas en plein soleil. Vérifiez la solidité du plancher avant d'installer votre appareil.
Mise à niveau de votre appareil (pour quelques modèles verticaux) : Recherchez les deux pieds de nivellement avant qui peuvent être collés parmi les matériaux d'emballage. (Dans de nombreux modèles, ces pieds sont déjà montés dans le dessous de l'appareil). 1. Visser ces pieds dans les trous avant sur le fond de l'appareil. L'arrière de l'appareil repose sur deux supports fixes. (Modèles encastrés aussi ont des pieds de niveau arrière qui peuvent fournir de nivellement plus précis). 2.
Soins de votre appareil Nettoyage d'un appareil sans givre : Utiliser des nettoyants non combustibles. «Sans givre» signifie que vous n’avez pas à dégivrer votre appareil. De givre est supprimé lorsque l'air se déplace et recueille l'humidité et la dépose sur le serpentin de refroidissement. Le serpentin de refroidissement se réchauffe périodiquement suffisante pour faire fondre la gelée, et l'eau s’écoule ensuite vers le bac de récupération (situé derrière la grille à la base) où elle s’évapore.
Grille à la base (certains modèles uniquement) : Pour retirer et remplacer la grille à la base: 1. Ouvrez la porte de l'appareil et retirez la grille de base en tirant vers le bas et par le haut. 2. Remplacez la grille de base en mettant les clips dans les ouvertures dans le panneau de l'appareil. Poussez la grille de base en place. Changement de l'ampoule (certains modèles uniquement) : NOTE: Pas toutes les ampoules à l'appareil ne s'adaptera à votre appareil.
Sélection et contrôle de la température VOTRE APPAREIL PEUT ONT UN THERMOSTAT SOIT MÉCANIQUE (CADRAN) OU NUMÉRIQUE. INSTRUCTIONS DE CADRAN SONT CI-DESSOUS. INSTRUCTIONS NUMÉRIQUES SONT À LA PAGE 28. Thermostat mécanique (cadran) (sur la plupart des modèles) : Votre réfrigérateur peut être commandé avec un bouton du thermostat situé à l'intérieur de l'unité, vers le coin à droite.
Thermostat numérique (sur certains modèles) : Si vous trouvez qu'il est nécessaire de changer le réglage de la température de votre appareil contrôlé par un thermostat numérique, s'il vous plaît vous référer aux floconmelting de neige instructions suivantes. Le panneau avant du de neige snowflake snowflake fondante flocon thermostat est illustré ici: de en bas UPhaut, & DOWN arrows La touche SET key SET Pour voir le point de consigne: Presser et relâcher immédiatement la touche SET.
Réglage de la commande de température : Vous pouvez régler la température en appuyant sur les symboles HAUT et BAS. Lorsque vous appuyez sur l'un des deux boutons pour la première fois, l'affichage LED indique la température initiale réglée précédemment. (La température préréglée à l'usine est de 38°F, ou 3°C.) La température que vous définissez va augmenter de un degré à chaque fois que vous touchez le symbole HAUT, et diminuera par un degré à chaque fois que vous touchez le symbole BAS.
Thermomètre (modèles PLUS) : Ce thermomètre numérique affiche simultanément les températures maximum, minimum et actuelle. La fonction Max/Min surveille et enregistre les relevés les plus élevés et les plus bas depuis la batterie était introduite ou depuis la dernière pression de bouton RESET. Le capteur de température, ou sonde, est enfermé dans une bouteille remplie de glycol que vous insérez dans l'emplacement à surveiller, comme à l'intérieur d'un réfrigérateur ou congélateur.
Instructions pour thermomètre / alarme (suite): Fonctions des commandes : MODE/RESET: Appuyez une fois pour réinitialiser le compte-rendu de la température Max / Min. Lorsque l'appareil sonne une alarme, appuyez une fois pour éteindre le signal sonore. HIGH/LOW (HAUT / BAS): Appuyez une fois pour afficher le réglage de l'alarme haute. Appuyez deux fois pour afficher le réglage de l'alarme basse. Appuyez trois fois pour afficher le relevé de la température actuelle.
Verrouillage du clavier (en option sur la plupart des modèles) Mot de passe par défaut réglé en usine : Le mot de passe par défaut réglé en usine est 0123. Si le mot de passe par défaut est perdu, appuyez sur la touche (située à l'intérieur de la boîte de la batterie) pendant 30 secondes, puis attendre le signal sonore d'avertissement qui signifie le mot de passe par défaut réglé en usine a été restauré.
Opération de modèles spécifiques Série SCFF51OSWH MED et ACF48WMEDDT Ces tout-congélateurs sans givre peuvent être intégrés ou autonomes. Ils ne nécessitent pas de dégivrage et ils ont un thermostat numérique, l'éclairage LED et une serrure. Au dessus de l'appareil est un système de refroidissement qui utilise un ventilateur pour fournir de l'air froid. Pour un fonctionnement optimal, ne pas bloquer le flux d'air avec le contenu.
Dépannage Tenter ces solutions d'abord pour éviter le coût d'un appel de service inutile. Votre appareil ne fonctionne pas : Un fusible est grillé ou le disjoncteur déclenché? Remplacer le fusible ou réenclencher le disjoncteur. Est-ce que le congélateur dégivre? (sur certains modèles) Vérifiez à nouveau pour voir si le congélateur fonctionne en 30 minutes. Votre congélateur peut régulièrement exécuter un cycle de dégivrage automatique.
Garantie limitée UN AN DE GARANTIE LIMITÉE Dans les 48 États américains contigus, pendant un an à partir de la date d'achat, lorsque cet appareil est utilisé et entretenu conformément aux instructions jointes à, ou fournies avec le produit, le garant paiera pour les pièces spécifiées en usine et pour la main-d’œuvre pour corriger les vices de matériaux ou de fabrication. Le service doit être fourni par une compagnie de service désignée.