Use and Care

10
To remove or change the position of a shelf
Follow the illustrations and instructions below if you wish to take out a shelf:
First remove all wine bottles from the shelf and pull it out as far as you can.
Simultaneously press down the left lever on the sliding shelf and press the right
one up, pulling the shelf out at the same time. Next, push up on the shelf to
release the front hook from the shelf bracket. Then just pull the shelf out.
To reinstall a shelf, follow these steps in reverse.
Storage of Wine Bottles
Your wine cooler was designed to store wine bottles in total security. Model
SWC902D can hold up to 76 standard wine bottles, and model SWC1380D can
hold up to 144.
We recommend that you observe the following tips to optimize loading:
 Spread your bottles out as evenly as possible over the shelves, so that weight
is not concentrated in one spot. Also make sure your bottles do not touch the
back of the cabinet or the step at the bottom of the lower chamber.
 Make sure that bottles are not all grouped together at the top or bottom of the
cabinet.
 Never stack more than one layer of bottles on a sliding shelf.
 Never try to pull out more than one sliding shelf at a time.
.