Use & Care

14
ºF/ºC Selector
Select the temperature display in Fahrenheit or Celsius degrees. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.
Setting the Temperature Control
You can set the temperature by pressing the UP and DOWN symbols. When you press either of
the two buttons for the first time, the LED readout will show the original temperature set
previously. (The temperature preset at the factory is 38°F or 3°C.)
The temperature you are setting will increase by one degree each time you press the UP
symbol, and will decrease by one degree each time you press the DOWN symbol.
The range of set temperatures is from 36°F to 43°F.
To view the set temperature at any time, press the UP or DOWN symbol. The set temperature
will flash in the display window for 5 seconds. After 5 seconds, the temperature inside the unit
will reappear in the display window.
Interior Light
The interior light makes it easy to view your items. Pressing the LIGHT symbol toggles between 2
modes of operation for the internal lights: functional (default) mode and showcase mode. If 10 you
are in functional (default) mode, the lights will turn on only when a drawer is open. If you are in
showcase mode, the lights will be on whether or not the drawer is open.
Control Panel for the SPRF34D (Bottom Unit as a Refrigerator/Freezer)
ON/OFF Power
To turn the appliance off, touch and hold the key for 5 seconds until the temperature display
goes off.
To turn the appliance on, touch and hold the key for 1 second until the temperature display
lights up.
NOTE: Touching the POWER key once can switch off the audible alarm when the alarm is on.
Setting the Temperature Control
The unit has two separate temperature compartments. You can set the temperature of the bottom
compartment (freezer) by touching the left UP and DOWN symbols and set the temperature of the
top compartment (refrigerator) by touching the right UP and DOWN symbols. When you touch
either key for the first time, the LED readout will show the original temperature set previously.
(The temperature preset at the factory is 0°F/-18°C for freezer compartment and 39°F/4°C for
refrigerator compartment.)
The temperature you are setting will increase by one degree each time you touch the UP symbol,
and will decrease by one degree each time you touch the DOWN symbol.
The range of the temperature control is from -11°F/-24°C to 1F/-12°C for freezer compartment
and from 36°F/2°C to 43°F/6°C for refrigerator compartment.
To view the set temperature at any time, touch the UP or DOWN symbol. The set temperature will
temporarily flash in the display window for 5 seconds. Then the display shows the current inner
temperature again.