Use & Care

5
EN
Dryer Description
The Progress or Delay lights show you the status of
the program, or the delay time when they flash.
During a delayed start the lights flash to show the
delay selected. When (not flashing) they show each
stage of the program by the corresponding light
turning on (see Start and Programs).
The Clean Filter (Clean Filter) light gives you a
reminder before every program that it is essential to
clean the filter every time the dryer is used (see
Maintenance and Care).
The Clean Condenser (Clean Condenser) light gives
you a reminder that it is essential to clean the
condenser at regular intervals (see Maintenance and
Care).
The ON/OFF (On/Off) button : If the dryer is running
and this button is pressed, the dryer is turned off.
Press again, the dryer restarts.
The PROGRAMS knob sets the program: rotate it until
the indicator is pointing to the program you want to select
(see Start and Programs).
The OPTION buttons/lights select available options for
your selected program. The lights indicate that the
option has been selected (see Start and Programs).
The START/PAUSE (Start/Pause) button/light starts
a selected program. When you press this button there
will be one beep and the progress lights will flash to
confirm the action. When a program is running, holding
this button in pauses the program and stops the dryer.
The light is green when the program is running, flashing
amber if the program has been paused or flashing
green if on standby waiting to start a program (see Start
and Programs).
Control panel
Clean Filter
Light
PROGRAMS
Knob
START/PAUSE
Button & Light
Indicator
Progress or Delay
Lights
Clean Condenser
Light
OPTION
Buttons & Lights
ON/OFF
Button
To open the door The features
Water container
Air intake
grille
Rating plate
Filter
Model &
Serial
numbers
Condenser cover handle
(Pull to open)
Condenser cover
Press and release the front
panel in position shown
Condenser unit
(Cover open)