Product Manual

ManualsBrandsSummit ManualsAppliancesFreestanding Chest Freezer, in White

• FF6L/ FF7L MED Series

All-refrigerators with automatic defrost

• FF28L/ FF29BL/ FF32L/ FF511L/ FF521BL/ FF560L/ FFAR2L/

FFAR21L/ FFAR22L MED Series

Compact all-refrigerators with automatic defrost

• FFAR9L/ FFAR10 MED Series

Mid-size/ Full-size storage all-refrigerators

• SCR450L/ SCR500BL/ SCR600/ SP6DS2D7/ SP6DS7/ SP6DSSTB7

MED Series

Specialty all-refrigerators (drawers or glass doors)

• CM411L/ CM421BL/ CP35LL/ CT66L/ S19L MED Series

Compact refrigerator-freezers

• CP171MED

Two-door refrigerator-freezer with two compressors

• CF05/ CF07ES/ FS60L/ UF850L // FCL44/ FS407L/ FS408BL/

SCF401SS MED Series

Mid-size // Compact freezers

• FS62L/ VT65ML // SCFF55L MED Series

Low-temperature freezers // Built-in frost-free freezers

• FS20L/ FS21L/ FS22L MED Series

All-freezers (-20°C)

• VT/ VLT Series

Low temperature freezers

• SCUF/ SCUR Series

Full-size frost-free all-freezers and all-refrigerators

• SCFF/ SCFR Series

Frost-free chest freezers and refrigerators

SUMMIT APPLIANCE

MEDICAL, LABORATORY AND SCIENTIFIC REFRIGERATORS AND FREEZERS

If you need service or call with a question, please have this

information ready. We advise you to keep this Use & Care

Guide in your possession.

Model: ____ Serial number: _

Options added:

Date of purchase: Dealer:

For parts: visit our website www.summitappliance.com/support

USE & CARE GUIDE

Felix Storch, Inc.

Summary of content (16 pages)

PAGE 1
SUMMIT APPLIANCE USE & CARE GUIDE MEDICAL, LABORATORY AND SCIENTIFIC REFRIGERATORS AND FREEZERS • FF6L/ FF7L MED Series All-refrigerators with automatic defrost • FF28L/ FF29BL/ FF32L/ FF511L/ FF521BL/ FF560L/ FFAR2L/ FFAR21L/ FFAR22L MED Series Compact all-refrigerators with automatic defrost • FFAR9L/ FFAR10 MED Series Mid-size/ Full-size storage all-refrigerators • SCR450L/ SCR500BL/ SCR600/ SP6DS2D7/ SP6DS7/ SP6DSSTB7 MED Series Specialty all-refrigerators (drawers or glass doors) • CM411L/ CM421BL
PAGE 2
APPLIANCE SAFETY Your safety and the safety of others are very important to us. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. You can be seriously injured or even killed if you don’t follow instructions. Safety messages will tell you what the potential hazard is, how to reduce the chance of injury, and what can happen if the instructions are not followed.
PAGE 3
INSTALLATION INSTRUCTIONS Excessive Weight Hazard ! Use two or more people to move and install your appliance. Failure to do so can result in back or other injury. ALLOW APPLIANCE TO SIT UPRIGHT FOR 24 HOURS BEFORE TURNING ON, TO ALLOW THE COMPRESSOR LUBRICANT TO DRAIN. 1. Remove packaging materials. 2. Remove tape and glue residue from surfaces before turning on the appliance. Rub a small amount of liquid dish soap over the adhesive with your fingers. Rinse with warm water and dry. 3.
PAGE 4
LOCATION REQUIREMENTS Keep flammable materials and vapors, such as gasoline, away from appliances. Failure to do so can result in fire, explosion or death. IMPORTANT: Do not install the appliance near an oven, radiator, or other heat source, nor in a location where the temperature will fall below 40°F (5°C). Do not place in direct sunlight. Check the strength of the floor before installing your appliance. It should hold the weight of a fully loaded appliance. Allow at least 1” (2.
PAGE 5
Level your appliance (some upright models) 1. Locate the two front leveling legs that may be taped among the packing materials. In many models these legs are already mounted into the underside of the appliance. 2. Screw these legs into the front holes on the bottom of the appliance. The back of the appliance rests on two fixed supports. (Built-in models also have rear level legs that can provide more precise leveling). 3. Adjust the front legs just enough to lift the cabinet up off the floor.
PAGE 6
REVERSING THE DOOR SWING (Selected models) If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the opposite side have already been prepared in the factory. For two-door units: • Take off the upper hinge cover from the top door and remove the screws that hold the top hinge. • Lift the hinge straight up to free the hinge pin from the socket in the top of the door.
PAGE 7
APPLIANCE CARE Cleaning Your Frost-Free Refrigerator (including models beginning with SCFF, SCFR, SCUF, SCUR) Use nonflammable cleaners. Frost-free means that you do not have to defrost your appliance. Frost is removed by air moving and collecting any moisture and depositing it on the cooling coil. The cooling coil periodically warms up enough to melt the frost, and the water then flows down to the drain pan (located behind the base grill) where it is evaporated.
PAGE 8
APPLIANCE CARE (cont’d) Base Grill (some models only) To Remove and Replace the Base Grill: 1. Open the appliance door and remove the base grill by pulling down and out from the top. 2. Replace the base grill by putting the clips in the openings in the appliance panel. Push in until the base grill snaps into place. Changing the Light Bulb (some models only) NOTE: Not all appliance bulbs will fit your appliance. Be sure to replace the bulb with one of the same size, shape, base size and wattage.
PAGE 9
TEMPERATURE SELECTION YOUR APPLIANCE MAY HAVE A MECHANICAL (DIAL) OR DIGITAL THERMOSTAT. DIAL INSTRUCTIONS ARE BELOW. DIGITAL INSTRUCTIONS ARE ON PAGE 10. HOW TO ADJUST THE THERMOSTAT Your refrigerator may be controlled with a thermostat knob located inside the unit, towards the right-hand corner. Turn the knob clockwise from the STOP (0) position toward the higher numbers for colder temperatures.
PAGE 10
DIGITAL THERMOSTAT INSTRUCTIONS If you find that it is necessary to change the temperature setting for your digital-thermostat controlled appliance, please refer to the following instructions. The front panel of the thermostat is illustrated here: melting snowflake snowflake UP & DOWN arrows SET key To see the SET POINT: Push and immediately release the SET key. The display will show the SET POINT value. Wait 5 seconds and the probe value will display again.
PAGE 11
ALARM INSTRUCTIONS (cont’d) OPERATION MODES SUMMIT alarms have two operating modes: NORMAL DISPLAY MODE and ALARM DISPLAY MODE. To change from one mode to another, press the MODE button once. NORMAL DISPLAY MODE - is indicated by the display of current temperature and the MIN (minimum) and MAX (maximum) temperatures. These temperatures relate to internal (probe) temperature if the probe is plugged in, and to ambient temp if the sensor probe is removed.
PAGE 12
KEYPAD LOCK (Optional on most models) Factory-set default password: The factory-set default password is 0123. If the default password is lost, press the key (located inside the battery box) for 30 seconds, then wait for the warning sound which signifies the factory-set default password has been restored. To set the password: While door is open, press the key (located inside the battery box) until it jingles, enter the 0123 password, then # within 10 seconds to confirm.
PAGE 13
SPECIFIC MODELS (cont’d) FF6L, FF7L, FF28L, FF29BL, FF32L, FF511L, FF521L, FF560L, FFAR2L, FFAR9L, FFAR10, FFAR21L, FFAR22L, SCR450L, SCR500BL, SCR600L, SP6DS2D7, SP6DS7, SP6DSSTB7 MED Series These models are all-refrigerator (no freezer compartment) with automatic defrost. All have cold plates on the rear wall, and the coldest spots in the refrigerator will be in the rear and toward the bottom. All except FF511LMED, FF521BLMED, FFAR21L and FFAR22L have interior fans to promote even cooling.
PAGE 14
SPECIFIC MODELS (cont’d) CP35LL, CT66L MED Series These models are cycle defrost refrigerator-freezers. The freezers are designed to operate at 0°F (-18°C), suitable for medical or laboratory uses. Both models have dual evaporators to maintain separate temperatures in the freezer and refrigerator. Defrost the freezer carefully, as directed on the previous page for manual defrost. The refrigerator section operates in the normal range (35 to 45°F, or 2 to 7°C) and defrosts automatically.
PAGE 15
TROUBLESHOOTING (cont’d) • Are the condenser coils dirty (on some models)? This prevents heat transfer and makes the motor work harder. Clean the condenser coils. • Is the door gasket sealed all the way around? If not, contact a qualified technician. Note: If the problem is not due to any of the above, remember that the compressor on your new appliance will operate longer than your old one due to its high-efficiency motor.
PAGE 16
WARRANTY ONE YEAR LIMITED WARRANTY FOR APPLIANCE Within the 48 contiguous United States, for one year from the date of purchase, when this appliance is operated and maintained according to instructions attached to or furnished with the product, warrantor will pay for factory-specified parts and repair labor to correct defects in materials or workmanship. Service must be provided by a designated service company. Outside the 48 states, all parts are warranted for one year from manufacturing defects.