Operator's Manual

Rev. 0 7/16/2020
24
Summus Medical Laser, LLC 1185 West Main St. Franklin, TN 37064 TEL: [phone]
Laser is designed to fit perfectly
in the left portion of the foam. All
accessories fit on the right.
Remove the foam on the right to
access the accessories.
Installation Site and Platform Selection
The Platinum Series P4H has an air cooling design system. The system
consists of a closed loop, liquid filled, heat pipe thermal transfer system with fan
and air assistance. Heat is transferred to the system and dissipated across a
framework of fins where it is released to the ambient atmosphere. Please choose
a well-ventilated location for equipment installation. The placement platform
requires a hard texture and shall not impede the air flow of the bottom of the
equipment. Keep the device at least 20cm away from the wall to facilitate the
operation of the power switch.
Fiber and Finger Switch Connection
The foot/finger switch connector is located directly above the device. Align
the red portion of the finger switch connector to the red portion of the device
connector and insert the connector horizontally into the device.
Unscrew and remove cap.
Do not let dirt or debris
enter this port.
Place and store the cap on
the chain of the fiber.