Operator's Manual

Rev. 0 7/16/2020
53
Summus Medical Laser, LLC 1185 West Main St. Franklin, TN 37064 TEL: [phone]
5
Date and time display found in customizations: Users can set the
date and time in the settings interface.
6
LED Operational Color
Color indicates current status of the equipment
Green - LED on when the device is in “Laser ready”
Yellow - LED on when the device is in “Laser active”
Red - LED on when device is in “Laser alarm”
7
CW
Continuous Wave - the mode of emission delivery
8
ISP
Intense Super Pulse - the mode of emission delivery
9
650nm
650nm ±20 wavelength button
10
810nm
810nm ±10 wavelength button
11
915nm
915nm ±10 wavelength button
12
980nm
980nm ±10 wavelength button
13
Volume
Adjusts audible
14
Go to Treatment
After protocol modifications you return to the treatment screen
15
ISP On/ Off
Allows ISP setting for customized protocol treatments
16
↑25%
Time Boost and/or Power Boost to increase treatment time and or
power for customized protocol treatments
17
↓25%
Time Bump and/or Power Bump to decrease treatment time and or
power for customized protocol treatments
Note：
1) The display screens in the manual are examples and may differ slightly
from the actual display of the purchased medical diode laser. Refer to the
actual display of the device.
2) Read the button table in detail to understand the definition and use of the
button.
3) The user is only able to set the parameters in the Standby state
WARNING: After completion of treatment, release the finger switch to return
the system from the READY state to the STANDBY state to avoid laser radiation