Operator's Manual

Rev. 0 7/16/2020
54
Summus Medical Laser, LLC 1185 West Main St. Franklin, TN 37064 TEL: [phone]
due to misuse.
6.4 Emergency Troubleshooting
When the device is powered on and operating, if there is abnormal function
(such as no display, light abnormal, etc.), immediately press the emergency stop
switch to stop the laser output. Identify and correct the cause prior to resuming
use. Reference Alarm Function and Fault Diagnosis and Analysis sections. If
necessary, please notify the dealer or the company for help.
Emergency stop switch reset method: Pull the emergency stop switch out and
away from the device to reset the emergency stop switch.
ON – Power On
OFF – Power interruption