Operator's Manual

Rev. 0 7/16/2020
55
Summus Medical Laser, LLC 1185 West Main St. Franklin, TN 37064 TEL: [phone]
7 Control Instruction for Use
7.1 Finger Switch
 Connect the connector of the finger switch cable to the device.
 Place the finger switch on the platform floor.
 Set up appropriate parameters according to patient needs.
 Apply pressure to enclosed finger switch with your foot. The yellow LED
Indicator light glows to indicate that the finger switch is operating when
pressure is applied on the pedal to emit laser.
Insert the black cable into the
finger switch by aligning red dots.
Push in and Do not twist.
Complete view. Do not twist
to tighten.
Fiber and black cable
inserted correctly.
WARNINGS：
1） Do not re-use disposable or single-use items，such as tips and fiber. Failure to
comply may result in reinfection or cross-infection and is a hazard to the
patient.
7.2 Goggles
Post warnings in therapy areas where the lasers are to be used, so that
appropriate goggles can be donned before entry into the area. The user, patient,
assistant, and any other persons in the therapy area during laser procedures