Install Instructions

Three Wire Float Switches Series 2359
[e-mail]
Call us at: 314-787-8059
www.SumpAlarm.Com
2 | P a g e
Instalation #2
With
Counterweight
Alternatively, if the float switch is
installed with the counterweight, it
will be necessary to slide the cord
grip down the length of the cable.
This can
be
accomplished by opening the cord
grip with a screwdriver and passing it
down the length of the cable. After
the cord grip is in position, the
counterweight can be slid down the
cable and locked to the cord grip.
Other Float Switch Ratings and Specifications:
- Your float switch is warranted in the field for two years.
- Temperature ratings from 32F to 140F, and rated to IP68, with CE approvals
- Stainless steel ball and Honeywell micro switch
- Casing made of Polypropylene for non-corrosive and non-combustible fluids
- It can be used in water tanks, low density oils and sewage water
- Not rated for hazardous or explosive applications.
- IEC 60730-1 (08-2003) + IEC 60730-2-16 (08-2001)
- The enclosed package has instructions in English and Spanish
Our contact information is above. Se hablamos Español.