Installation Instructions

TS-OA1SS-BLK OUTDOOR
BLUETOOTH SATELLITE SPEAKER
50 Feet Max
Optional Deputy Speakers
(TS-OA1SS-BLK)
Main Satellite Speaker
(TS-OA1SS-BLK)
Pairing your Bluetooth device and the
(TS-OA1SS-BLK) Satellite Speaker.
Basic Setup of the TS-OA1SS-BLK Satellite Speaker:
Main Satellite Speaker
(TS-OA1SS-BLK)
Tru-Scapes Bluetooth
Transformer (Power Source)
(TS-TAAB-150/300)
System Diagram
• Make sure you have turned on the Power Source to your
Bluetooth Speaker(s)
• On your Device, open Settings.
• Select Bluetooth
• Ensure your Bluetooth functionality is switched on at the top of
your screen. If the switch is green, your Bluetooth is already
enabled and nothing needs to be changed. If not, tap the toggle.
• Scroll down to Other Devices and look for your new Bluetooth
speaker’s name “Tru-Scapes Audio” in the given list. Be patient, as
it may take a moment to show up.
• Once it appears, tap it to connect.
• It will take a few seconds for the two devices to pair. When
they're done, the status will update to Connected on your screen.
• Settings such as Volume, Mute, etc., will be controlled
directly from your Bluetooth phone, tablet or other device.
NOTE:
Distances, both unobstructed and
obstructed, may dier depending on device
you are syncing up to the TS-OA1SS-BLK
Satellite Speaker. The speakers sync with
only one device at a time. You must
disconnect the current device before
syncing to another device.
Main, Deputy, and OFF
Switch
Satellite Speaker Specications:
• Packaging Dimensions: 21” x 13” x 11”
• Product Dimensions: 7” x 6” x 8”
• Bluetooth Type: BT 5.0
• Bluetooth Range: 66ft
• Tweeter Quantity: One
• Tweeter Size: 1”
• Woofer Quantity: One
• Woofer Size: 4”
• Wattage Draw: 20w Max
• Speaker Output: 25w
• Speaker impendence: 4Ω
• Speaker Frequency: 70Hz-20KHz
• Speaker Sensitivity: 88dB
RFI Disclaimer:
* Tru-Scapes Outdoor Audio does not
guaranty the performance of Bluetooth
devices due to RF (radio frequency)
interference.
Bluetooth is a wireless technology standard
for exchanging data between xed and
mobile devices over short distances using
short-wavelength UHF radio waves in the
industrial, scientic and medical radio bands.
To communicate between your devices,
Bluetooth sends signals over a 2.4GHz radio
frequency. There are many other devices and
processes that generate Electromagnetic
Radiation that can interfere with RF
Frequency.
1) Turn switch to designate one speaker as the Main Speaker. The Main Speaker should be placed
in a centrally located area when connecting to the optional Deputy Speakers for optimal Bluetooth
connectivity.
3) The optional Deputy Speakers should be placed up to a max of 50 feet in any direction from the
designated Main Speaker for optimum sound and connectivity. Distance may vary based on
environment. See additional notes under Pairing Bluetooth Device.
2) All Tru-Scapes Outdoor Audio Speakers can act as a Main or Deputy Speaker by turning the
switch (see diagram below). Only one speaker can operate as the Main Speaker when connecting
to a bluetooth device. No more than 6 Deputy Speakers can connect to the Main Speaker in series.
4) Wire Instructions: TURN OFF POWER to transformer. Determine all of the speaker locations
prior to installation. Run low voltage direct burial wire from the low voltage transformer to each
speaker and terminate at the last speaker. Daisy chain each speaker to main wire.
NOTE: Speakers are 9v - 15v low voltage AC and do not require polarity when connection
to wire. Tru-Scapes Speakers and Low Voltage AC Lighting can be connected on the same
wire permitting enough power from the Transformer.
All Tru-Scapes
Outdoor Audio
Speakers can act
as a Main or
Deputy Speaker
by turning the
switch. Only one
speaker can
operate as the
Main Speaker
when connecting
to a bluetooth
device.
Deputy Speakers
Bluetooth Device
The process of connecting a Bluetooth speaker to your device
only needs to happen one time. Once a Bluetooth speaker is
successfully paired to your device, it should automatically
connect each time it's powered on.