User's Manual

Follow these step-by-step instructions to set up your F2.
Power off the phone and remove battery before inserting
any cards!
Warning: SIM cards are small enough to become a
choking hazard, so please keep them away from children.
SIM cards are also quite delicate. Please be careful when
handling your card.
After installing the SIM card, memory
card, and battery, align the cover and press it
closed. Make sure you press all around the
edge to ensure a secure fit.
Plug in the microUSB connector to charge
the phone or transfer data.
Remove Back Cover
Insert microSD
™
Memory Card
Replace Back Cover
Charge/Sync
Insert SIM (Dual SIM Standby)
Insert the Battery
Remove the back cover by prying
the back cover up with your
fingers.
Power off the phone and remove
battery before inserting memory
card. Slide the SD clip to unlock,
tilt to open, insert card, close and
slide to lock again.
Orient SIM card to match diagram on slot.
SIM 1 (Mini) supports GSM connections.
SIM 2 (Mini) supports GSM connections.
Align the battery contacts, then insert the
battery contact-first.