KL INDUSTRIES INC. OWNER’S MANUAL Sun Dolphin Kayaks All Models Manufactured by: 1790 Sun Dolphin Drive Muskegon, Michigan 49444 phone 231-733-2725 fax 231-739-4502 email klsales@kloutdoor.com website www.sundolphin.
Dear Customer, Congratulations on the recent purchase of your new Sun Dolphin kayak manufactured by KL Outdoor! You have purchased a kayak from one of the nation’s leading manufacturers of small boats. Your kayak represents years of commitment to product design, excellence in engineering and quality in manufacturing. With proper care and maintenance, your kayak should last for many years to come.
SECURITY MEASURES WARNING R ead the following information before using your kayak. Failure to follow the warning precautions below may lead to serious injury including the possibility of death. Never exceed the maximum weight capacity. Never exceed your ability: Access your physical capability as to how long you can paddle and swim. Make sure drain plug is secure.
MATERIAL Your kayak is manufactured from High Density Polyethylene (HDPE). It is a very durable material. Our specially formulated HDPE has an ultra-violet inhibitor blended throughout the material to reduce color fade and maintain its strength. Polyethylene is a somewhat flexible material with some memory. This means it has a tendency to return to its original molded shape if distorted. BOAT SET-UP Note: Models vary and may not come equipped with the features listed below.
Make sure your drain plug is secure. Passengers should always wear a Personal Flotation Device. Check for wind conditions, currents or wave conditions that would make it difficult to paddle back. Always let someone know of your boating plans, your boating location, and when you expect to return. CARE AND MAINTENANCE Your kayak is designed to require minimal maintenance, and a little timely care will ensure a lifetime of enjoyment. Whenever you wash your boat, use mild soap and water.
STORAGE • Store your kayak on its side. Do not store your boat on its hull. •T o protect your kayak, provide shelter from sun using a tarp suspended above the boat. To prevent excessive heat build-up, do not cover boat with tarp laying directly on its surface. Leave adequate air space to allow for air circulation. • If possible, it is best to store your kayak inside for the winter. • Don’t allow water to accumulate between the deck and hull and freeze. • Don’t place the boat on 4x4’s or sawhorses.
Please Choose Your Model Bali 6 Sit-On Bali 8 Sit-On (SS Model Shown) Large, comfortable seating area Specifications Length 8’ 244cm Width 28” 71cm Depth 15” 38cm Weight 30 lbs. 14kg Capacity 197 lbs. 89kg Graduated foot wells ALSO FEATURES: • L ightweight, easy to carry • Tracks and paddles with ease while offering maximum stability Open cockpit allows the easiest of entry Convenient paddle holder Specifications Length 6’ 183cm Width 24” 61cm Depth 8” 20cm Weight 28 lbs. 13kg Capacity 140 lbs.
Camino 8 Sit-On (SS Model Shown) Please Choose Your Model Bali 10 & Journey 10 Sit-On (Journey 10 ss Model Shown) Large, open cockpit for easiest of entry Adjustable, padded seat with high backrest ALSO FEATURES: Specifications Length 10’ 305cm Width 30” 76cm Depth 11” 28cm Weight 44 lbs. 20kg Capacity 250 lbs.
Please Choose Your Model Bali 12 & Journey 12 Sit-On (Journey 12 ss Model Shown) Open cockpit allows the easiest Large, comfortable of entry seating area (seating Swivel fishing may vary) rod holder (Fishing model only) Bali 13.5 Tandem (ss Model Shown) ALSO FEATURES: Specifications Length 13½’ 412cm Width 34” 86cm Depth 17” 43cm Weight 70 lbs. 32kg Capacity 500 lbs.
Aruba 8 Sit-In (SS Model Shown) Large open cockpit Please Choose Your Model Padded seat back (ss model only) On board storage with shock cord deck rigging (ss model only) Convenient paddle holder Storage compartment (ss model only) Carrying handles Aruba 10 & Excursion 10 Sit-In (Excursion 10 Model Shown) ALSO FEATURES: Specifications Length 10’ 305cm Width 30” 76cm Depth 13” 33cm Weight 40 lbs. 18kg Capacity 250 lbs.
Please Choose Your Model Excursion 12 Sit-In Aruba 10 ss & (Excursion 12 Model Shown) Excursion 10 ss Sit-In (Excursion 10 SS Model Shown) Two flush mount rod holders (fishing model only) One swivel rod holder (fishing model only) Removable P.A.C. can be used as extra storage Protective thigh pads Specifications Length 12’ 366cm Width 29½” 75cm Depth 13½” 34cm Weight 47 lbs. 21kg Capacity 395 lbs.
LIMITED LIFETIME WARRANTY GENERAL INFORMATION Your boat represents years of commitment to product design, excellence in engineering and quality in manufacturing. With proper care and maintenance, your boat should last for many years to come. If you have any questions or need technical support please go to the “Contact Us” section of our website at www.sundolphin.com or contact our Customer Service Department at 800-733-2727. Do not return this boat to the retailer.