Instruction Manual

2 of 7
Programming Instructions
MOTOR BUTTON LAYOUT
Motor Setting
Button
Charging Jack
REMOTE BUTTON LAYOUT
15 Channel
Remote
Up Button
Stop Button
Down Button
Right/Left Buttons
(for switching
channels)
Remove Cover to
Expose Standard
Remote Back
P2 Setting Button
P2
15 Channel Glass
Wall Switch
P2 Setting Button
P2
(when held together)
15 Channel
Wall Switch
P2 Setting Button
P2
Up Button
Stop Button
Down Button
Right/Left Buttons
(for switching
channels)
BEFORE YOU BEGIN:
1. As a standard, motors are shipped in factory default mode without limits set.
2. Channel “0” cannot be programmed on a multi channel remote. It is intended to be a master channel for all motors.
3. Select the intended channel before activating wake-up mode, basic or advanced program settings.