Instruction Manual

4 of 7
Programming Instructions
STEP 3: ADVANCED PROGRAMMING
ADJUSTING MOTOR LIMITS
Motor
beeps
1X
GO TO UPPER OR LOWER LIMIT
OR
Setup is
complete
Motor
beeps
3X
PRESS
OR
ADJUST LIMIT
until motor jogs 1X
HOLD TOGETHER
upper
limit
lower
limit
OR
until motor jogs 1X
HOLD TOGETHER
upper
limit
lower
limit
OR
SETTING A PREFERRED POSITION
Allows you to set a third limit position for the shade per channel. Follow the steps below to set a preferred position.
WHILE IN TILT FUNCTION SHADE WILL GO TO LOWER LIMIT FIRST
AND THEN PROCEED TO THE PREFERRED POSITION.
Setup is
complete
Motor
beeps
1X
Motor
beeps
1X
Motor
beeps
3X
GO TO
PREFERRED
POSITION
PRESS
Motor jogs 1X
PRESS
Motor jogs 2X
PRESS
P2
Motor jogs
1X
When setup is complete, hold the stop button to go to the preferred shade position. Follow the steps
above to program different preferred positions to separate channels on a 15 channel remote.
DELETING A PREFERRED POSITION
P2
Setup is
complete
Motor
beeps
1X
Motor
beeps
1X
Motor
beeps
1X
GO TO
PREFERRED
POSITION
PRESS
Motor jogs 1X
PRESS
Motor jogs 1X
PRESS
Motor jogs
1X