Instruction Manual

7 of 7
Programming Instructions
STEP 3: ADVANCED PROGRAMMING (CONTINUED)
MOTOR SHIELDING
The mode allows a motor’s wireless radio signal to become temporarily disabled to save the battery life.
DISABLE
SIGNAL:
Setup is
complete
Motor
beeps
2X
HOLD
until motor jogs 2X
then RELEASE
ENABLE
SIGNAL:
Setup is
complete
Motor will
automatically
move to previously
assigned limit
HOLD
until motor jogs 2X
then RELEASE
If no limits are set, the motor will not move when enabled.
OPERATING SHADE AT MOTOR HEAD
This mode allows you to operate the shade in the event that the remote goes missing or is lost.
Note: pressing the motor setting button while the
shade is moving can also stop the motor.
HOLD
until motor jogs 2X
then RELEASE
SWITCHING DIRECTION AT MOTOR HEAD
The change of direction can be done after limits have been set.
Setup is
complete
Motor
beeps
3X
HOLD
until motor jogs 3X
then RELEASE
Test shade: Move shade up
and down to ensure that the
direction has been changed.