Replacement Part List

2
Specic Safety Rules For
Pole Chain Saws
mWARNING! SHOCK HAZARD! To protect yourself from
electrocution, do not operate the pole chain saw within
50 ft (15 m) of overhead wires. Failure to follow this instruction
could result in severe personal injury.
mWARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
battery-operated (cordless) power tool.
Before using
1. Study this manual thoroughly.
2. Familiarize yourself with the operation of the pole chain
saw and learn to use it properly.
3. Never permit others (especially children) who have not
read the manual to use the machine.
4. If the unit must be given to other people, give them
this manual.
5. Never remove the labels or security elements.
6. Do not use the pole chain saw if the on/o switch does
not work properly. If necessary, contact your dealer for
any repair.
7. Never expose the pole chain saw to rain or moisture.
Never allow water or other liquids to enter the machine.
8. Check the oil level before each use of the pole chain saw.
Never use the pole chain saw without oil in the tank or
when the amount of oil is low.
9. Check the condition of the chain guide, chain, fasteners
and safety switch before each use. Replace excessively
worn or missing parts.
10. Do not start the pole chain saw if the chain/sprocket end
cover is not installed.
11. Do not cut near other electrical machines.
12. Do not operate the pole chain saw in an environment with
ammable materials such as liquids, gases or dust. The
sparks generated by the operation of the machine can
cause an explosion.
13. Do not start cutting until the work area is cleared and
cleaned. Keep the work area clean and tidy to reduce the
risk of an accident.
14. For the rst use, it is recommended that the user be
accompanied by an experienced person.
When using
1. Use the pole chain saw only in daylight or good
articial light.
2. The use of power equipment can be regulated. Remember
to comply with legal regulations which may dier from one
location to another.
3. Do not use the pole chain saw if you are tired or ill. Also
avoid use if you have consumed alcohol or taken drugs.
A moment of inattention can result in serious injury.
4. When using, keep your hair away from the machine.
Never wear loose clothing or accessories such as
neckties, cords, scarves or jewelry that could get caught
in the machine or in the cutting system.
5. Wear close-tting clothing to help protect you from cuts.
Always wear long pants, sturdy non-slip shoes and
protective equipment such as gloves, goggles, a helmet
with a visor and an acoustic shield.
6. Do not allow anyone to remain in the range of the pole
chain saw during use. Keep people, children and animals
away from the work area. If conducting group work, keep
sucient distance between people.
7. Make sure that the handles are clean and dry. When the
pole chain saw is running, always rmly grip the front
handle with your left hand and the rear handle with your
right hand.
8. Always maintain a stable, balanced and rm stance during
operation. Do not work on slippery or unstable ground.
9. Firmly hold the pole chain saw with both hands. Put
yourself in a position that allows you to withstand the
forces applied by a backlash. Never let go of the machine.
10. Always start sawing with the moving chain running.
11. Do not saw with the tip of the saw guide bar.
12. During cutting, some tension on the wood may be
released suddenly and cause springbacks or hazardous
releases.
13. Never operate a damaged machine.
14. Do not overload the machine.
mWARNING! To reduce the time of exposure to vibration
and noise, it is preferable to use the machine with frequent
breaks and limit the duration of continuous work.
mWARNING! The vibration level during actual use of the
tool can dier depending upon how the tool is used.