Replacement Part List

6
Know Your Cordless Trimmer + Edger
Read the owner’s manual and safety instructions carefully before operating the cordless trimmer + edger. Compare the illustration
below to your cordless trimmer + edger in order to familiarize yourself with the location of the various controls and adjustments.
Save this manual for future reference.
1
2
3
4
5
6
7
8
9
11
10
12
13
15
16
14
17
18
19
20
1. Rear handle
2. Safety lock button
3. ON/OFF trigger switch
4. Battery compartment
5. Adjustable auxiliary handle
6. Handle knob
7. Edging coupler
8. Telescoping locking coupler
9. Edger guide + ower guard
10. Safety guard
11. Spool
12. Nylon cutting line
13. Cutting head pivot button
14. EcoSharp
®
lithium-ion charger
(iCHRG20)
15. Charger base indicator
16. Charger plug indicator
17. Lithium-ion LITE battery
(iBAT20-LTE)
18. Battery charge level indicator
19. Push button for battery
indicator
20. Push lock button
Technical Data
Battery Voltage* 20 V D.C.
Battery Capacity 2.0 Ah
Charging Time 70 min (for full charge)
Battery Run Time (max) 40 min
No Load Speed 8405 rpm
Cutting Swath 11 in. (28 cm)
Spool Length 17.4 ft (5.3 m)
Spool Advance Auto-feed
Line Diameter 0.047 in. (1.2mm)
Telescoping Pole 38.2 in. – 47.2 in.
(97 cm-120 cm)
Weight (trimmer only) 3.6 lbs (1.6 kg)
Weight (trimmer with battery installed) 4.4 lbs (2.0 kg)
*Initial no-load voltage, when fully charged, peaks at 21 volts; nominal voltage under typical load is 18 – 19 volts.