Replacement Part List

14
3. To use pole hedge trimmer for trimming low-lying foliage
or ground cover, hold the pole hedge trimmer at the
position as shown below (Fig. 16).
mCAUTION! Do not use the pole hedge trimmer for
cutting stems greater than 0.6" (1.6 cm) (or approximately
2/3 in. thick).
Use the pole hedge trimmer only for cutting normal shrubbery
found around houses and buildings.
Do not force the pole hedge trimmer through dense growth.
A slight back and forth sawing action may ease the cutting of
larger, more dense growth. If the pole hedge trimmer begins to
slow down, reduce the rate of speed at which you are trying to
cut. If the pole hedge trimmer becomes jammed, immediately
turn the trimmer o. Remove the battery and clear the jammed
debris from the cutter blades.
Care + Maintenance
m
WARNING! Before inspecting, cleaning, or servicing the
machine, remove the battery and wait for all moving parts to
stop. Failure to follow these instructions can result in serious
personal injury or property damage.
mWARNING! If the trimmer falls, carefully inspect it for
damage. If the blade, handle, or any other part are cracked,
bent, or may aect the trimmer's operation, it must be repaired
before it is used again.
mWARNING! Do not at any time let brake uids, gasoline,
petroleum-based products, penetrating oils, etc., come in
contact with plastic parts. Chemicals can damage, weaken,
or destroy plastic which may result in serious personal injury.
• Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
mWARNING! Blades are sharp. When handling the blade
assembly, wear non-slip, heavy-duty protective gloves.
Do not place your hand or ngers between blades or in any
position where they could get pinched or cut. NEVER touch the
blades or service the unit with the battery inside the unit.
• Store the pole hedge trimmer in the blade cover provided.
Store it in a dry location out of the reach of children.
• When servicing, use only identical replacement parts.
Use of any other parts can create a hazard or cause product
damage. Please contact an authorized Snow Joe
®
+
Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563) for all
replacement parts and accessories for your product.
Lubricate the Blades
For easier operation and longer blade life, lubricate the pole
hedge trimmer blade before and after each use.
1. Stop the motor and remove the battery.
2. Lay the pole hedge trimmer on a at surface. Remove any
debris on the blades.
3. Apply lightweight machine oil along the edge of the top
blade and make sure handle remains clean and dry
(Fig. 17).
If you will be using the pole hedge trimmer for an extended
period of time, it is advisable to stop work intermittently in
order to re-oil the blade.
NOTE: Do not oil while the pole hedge trimmer is running.
1. Stop the motor and remove the battery.
2. Lubricate the pole hedge trimmer as described above.
3. Insert the battery and resume use.
Cleaning the Pole Hedge Trimmer
1. Stop the motor and remove the battery.
2. Clean dirt and debris from the body of the pole hedge
trimmer, using a damp cloth with a mild detergent.
NOTE: Do not use any strong detergents on the plastic
housing or the handle, as they can be damaged by certain
aromatic oils such as pine and lemon, and by solvents
such as kerosene.
Fig. 16
Fig. 17