Replacement Part List

10
mWARNING! The intake water temperature must not
exceed 104ºF/40ºC.
To connect with fresh water/bucket water
1. To connect the equipped siphon hose with the power
cleaner, pull down the collar of the quick connector and t
it onto the adapter. Release the collar to lock the hose in
place (Fig. 6).
NOTE: Make sure the hose is connected securely. Gently
pull the hose connection to conrm it won't come o.
2. Drop the other end with the lter into a bucket of water or
into fresh water. Adjust the oater's position up or down
as needed to ensure the lter remains submerged below
the surface of the water.
To connect with spigot
1. First, connect the power cleaner with the provided garden
hose adapter. Pull down the collar of the garden hose
adapter and t it onto the siphon hose adapter. Release
the collar to lock the adapter in place. Then connect the
garden hose to the garden hose adapter. Twist tightly to
secure (Fig. 7).
2. Attach the other end of the garden hose to water supply
(Fig. 8).
mWARNING! Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
mWARNING! Water that has owed through back ow
preventers is considered to be non-potable.
Operation
Starting the Cleaner
1. Make sure the power cleaner is connected with proper
water source. Slide the battery in the battery compartment
until it clicks to lock it into position. Close the battery
compartment cover (Fig. 9).
2. If connected with a spigot, turn the water supply tap on
completely.
Fig. 6
Hose adapter
Collar
Fig. 7
Siphon hose adapter
Garden hose adapter
Garden hose
Fig. 8
Connect to water supply
Garden hose
In order to operate this cordless power cleaner you will need
and a iON+ 24V System battery and charger. See page 14
for battery and charger options and specications, or for
more information visit sunjoe.com.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
Fig. 9
Battery
compartment
cover
Battery