SDS

江苏苏美达五金工具有限公司测试中心 SUMEC
Report Number:SUMEC-2020-014
Page 7 of 16 pages
Fire-fighting measures
燃点：不适用
Flash Point: N/A.
自燃温度：不适用
Auto-Ignition Temperature: N/A.
灭火介质：大量水（降温），二氧化碳
Extinguishing Media: Water, CO
2
.
特殊灭火程序：自给式呼吸器
Special Fire-Fighting Procedures Self-contained breathing apparatus.
异常火灾或爆炸：当电芯暴露于过热的环境中时，安全阀可能会打开。Unusual Fire
and Explosion Hazards
Cell may vent when subjected to excessive heat-exposing battery contents.
燃烧产生的危险物品：一氧化碳，二氧化碳，锂氧化物烟气
Hazardous Combustion Products
Carbon monoxide, carbon dioxide, lithium oxide fumes.
6. 泄漏应急处理
Accidental release measures
为防止电池材料泄露或释放采取的措施
如果电池内部材料泄露，操作人员应立刻撤离事故区直到烟气消散。将通风设备
打开吹散危险性气体。用抹布擦净试验区，清除溢出的液体，将泄露电池放进塑
料袋中，然后放进钢制容器。避免皮肤和眼睛接触或吸入有害气体。
Steps to be taken in case Material is Released or Spilled
If the battery material is released, remove operators from area until
fumes dissipate. Provide maximum ventilation to clear out hazardous gases.
Wipe it up with a cloth, and dispose of it in a plastic bag and put into
a steel can. The preferred response is to leave the area and allow the