Replacement Part List

12
Scalping
The scalping technique removes unwanted vegetation down to
the ground. Hold the bottom of the trimmer head about 3 in.
(8 cm) above the ground and at an angle. Allow the tip of
the SharperBlade
™
to strike the ground around trees, posts,
monuments, etc. This technique increases SharperBlade
™
wear (Fig. 12).
Mowing
Your trimmer is ideal for mowing in places conventional lawn
mowers cannot reach. In the mowing position, keep the
SharperBlade
™
parallel to the ground. Avoid pressing the head
into the ground as this can scalp the ground and damage the
tool (Fig. 13).
Sweeping
Fanning action can be used for quick and easy clean up.
Keep the SharperBlade
™
parallel to and above the surfaces
being swept and move the tool from side to side (Fig. 14).
Edging
mWARNING! Because this procedure is close to the
On/O switch, make sure to remove the battery before
converting the machine.
1. To convert your SharperBlade
™
trimmer into an edger,
slide the Twist-N-Groom
™
locking collar downward and
twist the handle clockwise to an angle of 180° while
holding the pole. Release the collar and ensure it snaps
into place (Fig. 15).
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Twist-N-Groom
™
locking collar
Slide downward
Twist 180°
clockwise
2