Replacement Part List

13
2. Loosen the handle knob and adjust the auxiliary handle by
pivoting it to a comfortable position. Tighten the handle
knob to secure (Fig. 16).
3. Use the edge of the guard as a guide when cutting near
fences and walls (Fig. 17).
mWARNING! Do not trim near electrical wires.
4. To convert your edger back to a trimmer, hold the handle,
slide the Twist-N-Groom
™
locking collar downward and
twist the handle counterclockwise to an angle of 180°
while holding the pole. Release the collar and ensure
it snaps into place (Fig. 18). Adjust the auxiliary handle
as needed.
Maintenance
mWARNING! Before performing any maintenance task,
turn o the machine and remove the battery.
mWARNING! Always wear protective gloves during
maintenance tasks. Do not carry out maintenance when the
engine is running or hot.
• Regular cleaning and maintenance of you grass trimmer +
edger will ensure eciency and prolong the life of
your machine.
• After each cutting operation, take apart and clean out the
grass and soil from the whole trimmer + edger and guard.
• During operation, keep the air vents clean and free
from grass.
• Only use a cloth soaked with hot water and a soft brush to
clean the grass trimmer + edger.
• Do not spray or wet the appliance with water.
• Do not use detergents or solvents as these could ruin
the trimmer. The plastic parts can easily be damaged by
chemical agents.
• If the SharperBlade
™
no longer cuts or breaks, have the
blade replaced properly.
mCAUTION! The SharperBlade™ can inict deep cuts.
Handle with care; use with caution.
• For repairs which have not been explained in these
instructions, contact an authorized service center at
1-866-SNOWJOE (1-866-766-9563).
Fig. 16
Handle knob
Auxiliary handle
Fig. 17
Fig. 18
Twist-N-Groom
™
locking collar
Slide downward
Twist 180°
counterclockwise
2