Replacement Part List

ManualsBrandsSun Joe ManualsCultivators4.25 in. 24-Volt Electric Cordless Garden Tiller Plus Cultivator (Tool-Only)

, LLC

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

, LLC 24V-TLR-CT Form No. SJ-24V-TLR-CT-880E-MR1

OPERATOR’S MANUAL

CORDLESS TILLER + CULTIVATOR –

CORE TOOL

24-VOLT MAX* | 6" STEEL TILLING BLADES

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

You and any other operator of this cordless tiller + cultivator

must read, understand, and follow these instructions in their

entirety. Failure to follow these instructions may result in

ELECTRIC SHOCK, FIRE, and/or serious PERSONAL INJURY.

Notice the personal safety alert symbol

m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Replacement parts – When servicing this unit, use only

identical replacement parts. Replace or repair damaged

parts immediately.

3. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area.

4. Know your product – Know how to start and stop the

machine. Be thoroughly familiar with the controls.

5. Use the right tool – Do not use this machine for any job

except that for which it was intended.

6. Dress properly – Do not wear loose clothing or jewelry as

such articles can become caught in moving parts.

Wear a protective covering to contain long hair.

Wearing rubber gloves and substantial non-slip footwear

is recommended when working outdoors.

7. Avoid accidental starting – Do not carry the cordless

tiller + cultivator with your nger on the switch.

mCAUTION! Moving parts will continue to run for several

seconds after turning o the machine.

8. Moving parts – Keep hands and feet away from moving

parts. Keep guards in place and in proper working order.

9. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

10. Do not overreach – Keep proper footing and balance at

all times.

If the cordless tiller + cultivator strikes a foreign object,

follow these steps:

• Stop the cordless tiller + cultivator.

• Inspect for damage.

• Repair any damage before restarting and

operating the tool.

11. Use safety glasses – Also use safety footwear,

snug-tting clothing, protective gloves, hearing, and head

protection.

12. Remove the battery – Remove the battery from the

cordless tiller + cultivator when it is not in use,

before servicing it, when changing accessories,

and when performing any other maintenance task.

13. Store idle tool indoors – When not in use, the cordless

tiller + cultivator should be stored indoors in a dry and

high or locked-up place out of the reach of children.

14. Maintain the cordless tiller + cultivator with care –

Keep the cutting edges sharp and clean for optimal

performance and to reduce the risk of injury.

Keep the handles dry, clean, and free from oil and grease.

Follow the additional recommendations described in the

maintenance section of this manual.

15. Avoid dangerous environments – Do not use the tiller

+ cultivator in rain or in damp or wet locations. Do not

operate the tiller + cultivator in gaseous or explosive

atmospheres or use the tiller + cultivator near ammable

or combustible liquids. Motors in these tools normally

spark, and the sparks might ignite fumes.

16. Stay alert – Watch what you are doing. Use common

sense. Do not operate the cordless tiller + cultivator when

you are tired or under the inuence of drugs, alcohol, or

other medication.

Summary of content (20 pages)

PAGE 1
R OPERATOR’S MANUAL A Division of Snow Joe®, LLC CORDLESS TILLER + CULTIVATOR – CORE TOOL 24-VOLT MAX* | 6" STEEL TILLING BLADES 24V-TLR-CT Form No. SJ-24V-TLR-CT-880E-MR1 mCAUTION! Moving parts will continue to run for several IMPORTANT! seconds after turning off the machine. Safety Instructions 8. Moving parts – Keep hands and feet away from moving parts. Keep guards in place and in proper working order. All Operators Must Read These Instructions Before Use 9.
PAGE 2
Operation 17. Check for damaged parts – Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced.
PAGE 3
mWARNING! Do not use a battery pack or appliance that • The motor housing remains hot for a short period after the machine is turned OFF. Allow the motor housing to cool completely before touching or storing near combustible material. is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
PAGE 4
mWARNING! To reduce the risk of electric shock, 5. Do not throw battery packs into an open fire as this poses a risk of explosion. always unplug the charger before performing any cleaning or maintenance. Do not allow water to flow into the charger. Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards. 6. Do not ignite the battery pack or expose it to fire. 7. Do not exhaustively discharge batteries. Exhaustive discharge will damage the battery cells.
PAGE 5
9. When handling batteries, be wary of electrostatic charge. Electrostatic discharges can damage the electronic protection system and the battery cells. Avoid electrostatic charging and never touch the battery poles. 7. Do not overcharge batteries. Do not exceed the maximum charging times. These charging times only apply to discharged batteries. Frequent insertion of a charged or partially charged battery pack will result in overcharging and cell damage.
PAGE 6
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow all instructions in the user manual(s) before attempting to assemble and operate. Wear eye protection, breathing protection, and ear protection (i.e.
PAGE 7
Know Your Cordless Tiller + Cultivator Read the owner’s manual and safety instructions carefully before operating the cordless tiller + cultivator. Compare the illustration below to the cordless tiller + cultivator in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. 1 2 3 SOLD SEPARATELY 4 Battery + Charger options available at sunjoe.
PAGE 8
Technical Data IMPORTANT! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils, or small parts. These items can be swallowed and pose a suffocation risk! Battery Voltage*................................. 24 V D.C. Battery Capacity................................ See page 16 for battery options and specifications Battery Pack Operation Charging Time...................................
PAGE 9
Charger Operation Fig. 2 CORE TOOL Battery pack Charging BATTERY + CHARGER SOLD SEPARATELY red In order to operate this cordless tiller + cultivator you will need a iON+ 24V System battery and charger. See page 16 for battery and charger options and specifications, or for more information visit sunjoe.com. 24VCHRG-QC quick charger (Sold separately) mWARNING! Charge only 24V iON+ lithium-ion battery packs with its compatible 24V iON+ lithium-ion charger.
PAGE 10
5. Timely recharging of the battery will help prolong the battery's life. You must recharge the battery pack when you notice a drop in the equipment's power. Fig. 5 IMPORTANT! Never allow the battery pack to become fully discharged as this will cause irreversible damage to the battery. Pole assembly Tiller + cultivator head lock 6. When charging is complete, remove the battery from the charger by pulling the push lock button and sliding the battery backward to unlock it from the charger.
PAGE 11
1. Loosen the auxiliary handle by turning the handle knob counterclockwise (Fig. 8). For safety reasons, it is essential to read the entire instruction manual before first use and to observe all the instructions contained within this manual. This product is intended for private domestic use only. It is not intended for any commercial trade use. It must not be used for any purposes other than those described. Fig.
PAGE 12
Battery compartment Fig. 10 mWARNING! In some municipalities, regulations define restrictions for use of such products, including the times and days when operation is permissible. Ask your community for detailed information and observe these regulations in order to preserve a peaceful neighborhood and avoid committing administrative offenses. Tilling • Make sure that the work area is clear of stones, sticks, wire, or other objects that could damage the product or its motor.
PAGE 13
mWARNING! Stop the motor if the product strikes a • All nuts and bolts must be checked periodically for tightness before operation. After prolonged use, especially in sandy soil conditions, the working tool will become worn and lose some of its original shape. Tilling efficiency will be reduced and the working tool should be replaced. foreign object. Switch the product off, remove the battery, and let it cool completely.
PAGE 14
Storage To replace the blades, follow the steps below: 1. Turn off the unit, remove the battery and wait until the blades have come to a standstill. • Examine the cordless tiller + cultivator thoroughly for worn, loose, or damaged parts. Should you need to repair or replace a part, contact an authorized Snow Joe® + Sun Joe® dealer or call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563) for assistance. 2.
PAGE 15
Service + Support Recycling + Disposal The product comes in a package that protects it against damage during shipping. Keep the package until you are sure that all parts have been delivered and the product is functioning properly. Recycle the package afterwards or keep it for long-term storage. If your Sun Joe® 24V-TLR-CT cordless tiller + cultivator requires service or maintenance, please call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).
PAGE 16
Optional Accessories mWARNING! ALWAYS use only authorized Snow Joe + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this cordless tiller + cultivator. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your cordless tiller + cultivator. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.
PAGE 17
NOTES 17
PAGE 18
NOTES 18
PAGE 19
SNOW JOE® + SUN JOE® CUSTOMER PROMISE ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise. OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase.
PAGE 20
sunjoe.