Replacement Part List

Lower Tube Assembly

1. Insert the lower tube into the end opening on the upper

tube (Fig. 3).

2. Secure the tube assembly using the provided retaining

screw. Tighten it with a Phillips head screw driver (Fig. 4).

Collection Bag Assembly

When the unit is to be used as a vacuum/mulcher, the

collection bag must be attached. Follow the instructions below

to install the collection bag.

1. Insert the collection bag adapter into the vacuum/mulcher

air outlet until the collection bag clicks in, then fasten the

bag strap to the strap hook (Fig. 5).

2. To remove the bag, simply press the bag releasing button,

and pull the bag o (Fig. 6). Detach the strap from the

strap hook.

mWARNING! DO NOT OPERATE THIS TOOL AS A

VACUUM/MULCHER WITH COLLECTION BAG REMOVED.

Serious injury from the fan or ying debris could result.

Shoulder Support Strap

Fitting + Adjusting

1. Clip the shoulder support strap to the strap hook on the

top of the blower, as shown (Fig. 7).

Fig. 3

Lower tube

Upper tube

Fig. 4

Lower tube

retaining screw

Fig. 5

Collection bag

strap hook

Collection

bag

adapter

Fig. 6

Collection

bag releasing

button

Fig. 7

Shoulder strap

hook