Replacement Part List

ManualsBrandsSun Joe ManualsCultivators14 in. 11 Amp Electric Dethatcher with Thatch Collection Bag Refurbished

Unpacking

Carton Contents

• Dethatcher housing

• Upper handle bar assembly

• Middle handle bar (2)

• Lower handle

• Thatch collection bag

• Cable relief holder

• Cable clip (2)

• Manual

Mounting Accessories

• Phillips screws (2)

• Handle knobs and bolts (4)

1. Carefully remove the dethatcher and all other items from

the shipping carton.

2. Check that all the items in the above list are supplied.

3. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you nd damaged or

missing parts, DO NOT return the unit to the store. Please

call 1-866-766-9563.

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use your new electric

dethatcher.

Assembly

Carefully follow the instructions below to assemble your

Sun Joe

electric dethatcher.

NOTE: The packaging is made of recyclable materials.

Properly dispose of these materials in accordance with

regulations.

mWARNING! Do not connect the dethatcher to the power

supply until assembly is complete. Failure to comply could

result in accidental starting and severe personal injury.

Connecting the Handle Bars

1. Insert the lower handle into the motor housing and secure

it with the two Phillips screws (Fig. 1).

2. Secure the two middle handle bars to the lower handle

using the rst set of knobs and bolts (A). Tighten the

knobs on each side to ensure a secure t (Fig. 2).

3. Hang the cable relief holder on the upper handle (Fig. 2).

4. Connect the upper handle to the middle handle bars using

the second set of knobs and bolts (B). Tighten the knobs

on each side to ensure a secure t (Fig. 2).

NOTE: The two middle handle bars can be secured in two

positions depending on your height preference.

Mounting + Emptying the Thatch

Collection Bag

mWARNING! Never operate the machine without a

securely mounted collection bag and without the thatch

collection bag cover in place.

Fig. 1

Phillips screw

Lower handle

Fig. 2

Upper handle

Height

adjustment

holes

Middle handle bar

Cable relief

holder

Lower

handle