Replacement Part List

ManualsBrandsSun Joe ManualsLawn Mower BladesCJ601E Replacement Wood Chipper Blade (Single)

A Division of Snow Joe

, LLC Model CJ601E Form No. SJ-CJ601E-880E-MR5

OPERATOR’S MANUAL

ELECTRIC WOOD CHIPPER + SHREDDER

14-AMP | 16:1 REDUCTION RATIO

, LLC

SAVE THESE INSTRUCTIONS

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

You and any other operator of this wood chipper + shredder

must read, understand, and follow these instructions in

their entirety. Failure to follow these instructions may result

in ELECTRIC SHOCK, FIRE, and/or serious PERSONAL

INJURY.

Notice the personal safety alert symbol

m used in this

manual to draw your attention to a WARNING given along

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION, and

AWARENESS.

mWARNING! Wear appropriate personal hearing

protection during use. Under some conditions and duration of

use, noise from this product may contribute to hearing loss.

mWARNING! The rotating blades can cut you. Keep

hands and feet away from the hopper and the discharge chute.

Before using the wood chipper + shredder, familiarize yourself

with the controls, especially how to stop the unit in an

emergency. The only individuals who should use the wood

chipper + shredder are those who thoroughly understand

these instructions and know how to properly operate the unit.

Children should never be allowed access to the wood chipper

+ shredder.

Retain this manual for future reference and reread it at the start

of each chipping season.

General Safety

1. Avoid dangerous environments – Do not use the wood

chipper + shredder in rain or in damp or wet locations. Do

not operate the unit in gaseous or explosive atmospheres

or use the unit near ammable or combustible liquids.

Motors in these tools normally spark, and the sparks

might ignite fumes.

2. Dress properly – Do not wear loose clothing or jewelry as

such articles can become caught in moving parts. Wear

a protective covering to contain long hair. Wearing rubber

gloves and substantial non-slip footwear is recommended

when working outdoors.

3. Use safety glasses – Also use dust mask, safety

footwear, snug-tting clothing, protective gloves, hearing,

and head protection.

4. Extension cords – To prevent electric shock, use only

with an extension cord suitable for outdoor use.

5. Disconnect the tool – Disconnect the wood chipper +

shredder from the power supply when it is not in use,

before servicing it, when changing accessories, and when

performing any other maintenance task.

6. Do not abuse the cord – Never carry the wood chipper

+ shredder by the cord or yank the cord to disconnect it

from the receptacle. Keep the cord away from heat, oil,

and sharp edges.

7. Stay alert – Watch what you are doing. Use common

sense. Do not operate the wood chipper + shredder when

you are tired or under the inuence of drugs, alcohol, or

other medication.

8. Store idle tool indoors – When not in use, the wood

chipper + shredder should be stored indoors in a dry and

high or locked-up place out of the reach of children.

9. Maintain the wood chipper + shredder with care –

Keep the cutting edges sharp and clean for optimal

performance and to reduce the risk of injury. Inspect the

extension cord periodically and immediately replace it

if damaged. Keep the handles dry, clean, and free from

oil and grease. Follow the additional recommendations

described in the Care + Maintenance section of this

manual.

10. Check for damaged parts – Before further use of the

appliance, a part that is damaged should be carefully

checked to determine that it will operate properly and

perform its intended function. Check for alignment of

moving parts, binding of moving parts, breakage of parts,

mounting, and any other condition that may aect its

Summary of content (16 pages)

PAGE 1
R OPERATOR’S MANUAL A Division of Snow Joe®, LLC ELECTRIC WOOD CHIPPER + SHREDDER 14-AMP | 16:1 REDUCTION RATIO Model CJ601E Form No. SJ-CJ601E-880E-MR5 IMPORTANT! General Safety Safety Instructions 1. Avoid dangerous environments – Do not use the wood chipper + shredder in rain or in damp or wet locations. Do not operate the unit in gaseous or explosive atmospheres or use the unit near flammable or combustible liquids. Motors in these tools normally spark, and the sparks might ignite fumes.
PAGE 2
mWARNING! Never reach into the hopper until the operation. A part that is damaged should be properly repaired or replaced. Contact the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563) for assistance. wood chipper + shredder has come to a complete stop and is unplugged. The blades will continue to rotate for a few seconds after the unit is turned off. 11. Lighting – Only operate your wood chipper + shredder in daylight or good artificial light. 9.
PAGE 3
m WARNING! Table 1. Method of Securing Extension Cord m Cord set Appliance cord Electric shock may cause SEVERE INJURY or DEATH. Heed these warnings: • Do not allow any part of the wood chipper + shredder to make contact with water while it is in operation. If the appliance becomes wet while turned off, wipe dry before starting. (A) Tie cord as shown • Use only a UL-, CSA- or ETL-rated extension cord for outdoor, all-weather use. • Do not use an extension cord over 100 ft (30 m).
PAGE 4
Double-Insulated Appliances In a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance. Servicing a doubleinsulated appliance requires extreme care and knowledge of the system, and should be performed only by qualified service personnel at an authorized Snow Joe® + Sun Joe® dealer.
PAGE 5
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow all instructions in the user manual(s) before attempting to assemble and operate. SAFETY ALERT – Indicates a precaution, a warning, or a danger.
PAGE 6
Know Your Electric Wood Chipper + Shredder Read the owner’s manual and safety instructions carefully before operating the electric wood chipper + shredder. Compare the illustration below to the electric wood chipper + shredder in order to become familiar with the location of the various controls and adjustments. Save this manual for future reference. 1 1. Paddle 2. Hopper 12 2 3. Main body 4. Shredder stand assembly 5. Wheel axle 6. Wheel 7. Paddle holder 8. Appliance cord 3 10 9. Motor 10.
PAGE 7
Unpacking 2. Insert the wheel axle into the shredder stand assembly, and re-assemble the shaft sleeve and the support cover (Fig. 2). Carton Contents • Electric wood chipper + shredder main body with hopper Fig. 2 • Electric wood chipper + shredder stand assembly • Paddle holder Shaft sleeve Wheel axle • Paddle • Wheel axle with hardware Shaft sleeve • Wheels (2) • Shredder stand assembly washers and screws (2) Stand assembly • Wrench • Hex key • Manuals with registration card 1.
PAGE 8
Fitting the Paddle Holder and the Paddle Wheel Fig. 5 1. Stand the unit up, and clip the paddle holder to the standing assembly (Fig. 8). Fig. 8 Standing assembly Wheel cover Paddle holder 6. Repeat the steps 2 – 4 to assemble the other wheel. Stand Assembly Fitting 1. Turn the wood chipper + shredder main body upside down, insert the two ends of the stand assembly into the housing (Fig. 6). Fig. 6 2. Clip the paddle into the paddle holder (Fig. 9). Fig.
PAGE 9
Fig. 10 3. To power the wood chipper + shredder off, push the removable safety switch to the OFF position. To disable the machine, remove the safety switch completely (Fig. 13). Hopper locking knob Fig. 13 PR ES REMOVE TO LOCK ET R KE CIR ON IT BREA CU S TO RES OFF Removable safety switch 1. Make sure the removable safety switch is in the OFF position. Plug the wood chipper + shredder's appliance cord using an approved extension cord, making a knot with the two cords (Fig. 11). Fig.
PAGE 10
Overload Protection 2. Use the paddle to push the material inside the hopper if needed (Fig. 15). Your electric wood chipper + shredder is designed with overload protection. If the shredder is clogged during shredding, the overload protection will cut the power automatically to protect your shredder. Wait at least 1 minute before restart the unit when the power is cut. Fig. 15 1. To restart the wood chipper + shredder, first press the reset button (Fig. 16). Paddle Fig.
PAGE 11
1. Stop the motor and disconnect the unit from the power supply. Fig. 17 2. Unscrew the hopper locking knob counterclockwise to open the hopper (Fig. 17). 3. Align the cutting head past the splash guard so that the blade bolts can be removed; secure the cutting head from rotating by inserting a rod (e.g. a screwdriver) or rag between the cutting head and body. Unscrew the blade bolts using the supplied hex key, and remove the blade (Fig. 19). Hopper locking knob 4.
PAGE 12
Storage Follow the steps below to prepare the electric wood chipper + shredder for storage: 1. Disconnect the power supply to the wood chipper + shredder. 2. Clean the wood chipper + shredder with a damp cloth or hand brush. 3. Inspect the wood chipper + shredder carefully for worn, loose, or damaged parts. Check connections and screws and tighten if necessary. Pay special attention to the blade and replace if it shows signs of wear. Refer to the Care + Maintenance section. 4.
PAGE 13
Troubleshooting Problem Possible Cause Motor does not run • Power failure/unit not plugged into a working receptacle. Remedy • The overload protection has responded. • The hopper is opened. • Check to make sure unit is plugged into a working outlet. Make sure extension cord is not damaged. • Remove any chips and press the reset button. Wait one minute before pressing the ON/OFF switch to restart the unit. • Check to make sure the hopper is secured and the hopper locking knob is tightened.
PAGE 14
Optional Accessories mWARNING! ALWAYS use only authorized Snow Joe + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this tool. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your tool. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.
PAGE 15
SNOW JOE® + SUN JOE® CUSTOMER PROMISE ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise. OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase.
PAGE 16
snowjoe.